AR40.20-S-0301A | Checking vehicle level at front and rear axle with electronic inclination measuring instrument and adjusting if necessary | 29.4.96 |
MODEL 638
S40.20-1003-09
| Measuring | ||
1 | Take the general remarks for the wheel alignment into account | Bend the vehicle several times with force before making the measurement. The vehicle level must be measured on the front and rear axle in order to be able to assign the rated values for the vehicle magnitudes. | |
2 | Measure the vehicle level on the front axle | Measurement between the centre of the wheel hub and the lower edge of the mudguard | |
3.1 | Measure the vehicle level on the rear axle | Vehicles with metal spring suspension, SAA 503.027/01 Measurement between the centre of the wheel hub and the lower edge of the mudguard | |
3.2 | Measure the vehicle level on rear axle | Vehicles with pneumatic suspension, SAA 503.026/01 | |
Check vehicle level, adjusting it if required to the rated vehicle level value |