Checking and adjusting the vehicle level

Тип ar · тема 32.22 · версия 0101 · 1999-05-31

Применимость: MODEL 638.0 /1 with CODE (CL0) Rear air suspension lowerable/liftable MODEL 638.2 with CODE (CL0) Rear air suspension lowerable/liftable

Нет на языке «ru»; показано на языке Английский.

Расположение

Функциональная группа 2 Ходовая часть › 32 Подвеска › 32.22 Пневматическая подвеска — Серия 638 (модели 0**, 1**, 2**)

EinPAS 20 Ходовая часть › 20.16 Подвеска › 20.16.1 Базовая информация — Серия 638 (модели 0**, 1**, 2**)

AR32.22-S-7000A

Checking and adjusting the vehicle level

1.4.96

MODEL 638.0 /1 with CODE (CL0) Rear air suspension lowerable/liftable

MODEL 638.2 with CODE (CL0) Rear air suspension lowerable/liftable

Checking and adjusting the vehicle level

S32.22-0508-09

087 Hand-Held-tester

1 Adjusting device

2 Rubber spring

3 Wishbone

4 Diagnosis connector

	Checking
1	Plug the Hand-Held-tester (087) into the diagnosis socket
2	Place the adjusting device (1) under the rubber spring (2) in the wishbone (3)		*638589022300
3	Lower the vehicle with the Hand-Held-Tester (087)	 Stop in adjusting device (1)
4	Carry out calibration of pneumatic suspension	 Follow the instructions which appear on the HHT Display
5	Raise the vehicle with the Hand-Held-tester (087)
6	Remove the adjusting device (1)

638 589 02 23 00

setting gauge