Generalities for chassis alignment

AR40.20-S-0201A

Generalities for chassis alignment

4.7.95



Checking



State of vehicle

The vehicle must be measured and adjusted in the state in which is it normally used.

 The chassis alignment will be carried out with reference to the vehicle level



Use measurements sheets for chassis alignment

Block of sheets

Order no. B20.800.98.230.00.B-00/0291

Continuous paper

Order no. B20.800.98.230.10-B-00/0491

1

State of the tyres

Visual control of wear, depth of tread, damage

2

State of the rims

Visual control of damage

3

Tyre pressure

See tyre pressure values on the utilisation manual or on the characteristics plate placed on the tank lid, correcting them if required

4

Vehicle interior

Visual control of damage, corrosion of chassis components and body carrier parts, leaks in sets and lines

5

Play of wheel bearings

 Check without comparing clock

6

Visual control of steering mechanics

Visual control

AP46.00-D-4650A

7

Bellows in steering linkage

Visual control

AR46.40-S-7200A