AR68.30-P-4300AL | Remove/install headliner | 25.7.06 |
MODEL 169.0 /3 with CODE (417) Lamella roof
MODEL 245.2
with CODE (417) Lamella roof
with CODE (416) Fixed panoramic glass roof
P68.30-3013-06
Shown on model 169.0
1 Headliner
2 Expansion clip
3 Edge guard
5 Spacer
6 Electrical connectors
7 Bracket
P68.30-3012-07
Shown on model 169.0
1 Headliner
8 Retaining tabs
4 Retaining clamp
| Removing | ||
| Note on function reliability of windowbag | ||
1.1 | Open lamella roof completely. | On vehicles with code (417) Lamella roof | |
2 | Remove overhead control panel control unit | ||
3 | Remove expansion clip (2). | ||
4 | Remove left and right sun visor | ||
5.1 | Remove paneling from left and right upper B-pillar | Models 169.0, 245.2 | |
5.2 | Remove left and right B-pillar paneling | Model 169.3 | |
6 | Remove paneling from left and right C-pillar | Do not remove belt end fitting Lay paneling with seat belts installed down to side | |
Model 169.0 | |||
Model 169.3 | |||
Model 245.2 | |||
7.1 | Remove Parktronic system warning display (PTS) in rear | On vehicles with code (220) Parktronic system (PTS) | |
8.1 | Remove rear dome lamp | Not on vehicles with code (876) Interior lights package | |
9.1 | Remove eyeglass compartment on driver-side from roof | Model 245.2 | |
10 | Remove all handles from roof | ||
11 | Remove edge guard (3) from door cutouts in area of headliner (1) | ||
12 | Remove headliner (1) from retaining tabs (8) on vehicle roof and lay down on head restraints on front seats and rear bench seat. | Helper required | |
13 | Disconnect electrical connectors (6) from electrical components installed on headliner (1) | Number of electrical connectors (6) according to equipment. | |
14 | Remove headliner (1) from vehicle through rear door cutout with aid of helper and lay down on suitable surface. | Handle headliner (1) carefully Danger of damaging headliner (1). | |
| Install | ||
15 | Prepare roof paneling (1) for installation | Only when replacing headliner (1). | |
16 | Lay headliner (1) through rear-end door cutout into vehicle with aid of helper | Handle headliner (1) carefully Danger of damaging headliner (1). | |
Lay headliner (1) down on head restraints of front seat and rear bench seat | |||
17 | Connect electrical connectors (6) and position headliner (1) on vehicle roof with helper | Number of electrical connectors (6) according to equipment. Replace damaged retaining clamps (4). | |
Ensure that retaining clamps (4) are seated correctly on retaining tabs (8) on vehicle roof and on headliner (1) | |||
18 | Install all handles on roof | ||
19.1 | Install eyeglass compartment on driver-side on roof | Model 245.2 | |
20.1 | Install dome lamp in rear | Not on vehicles with code (876) Interior lights package | |
21.1 | Install Parktronic warning display (PTS) in rear | On vehicles with code (220) Parktronic system (PTS) | |
22 | Install paneling on left and right C-pillar | Model 169.0 | |
Model 169.3 | |||
Model 245.2 | |||
23.1 | Install paneling on left and right upper B-pillar | Models 169.0, 245.2 | |
23.2 | Install paneling on left and right B-pillar | Model 169.3 | |
24 | Install edge guard (3) on door cutouts | Ensure correct seating. | |
25 | Install left and right sun visor | ||
26 | Install expansion clip (2) | Replace damaged expansion clip (2). | |
27 | Install overhead control panel control unit. | ||
28.1 | Close lamella roof | On vehicles with code (417) Lamella roof |
Documente menționate
- ah9160p069301a Indicaţie pentru asigurarea funcţionării windowbag
- ar5465p0007ak
- ar6830p4305ak
- ar6830p4330ak
- ar6830p4400bk
- ar6830p4490ak
- ar6830p4490al
- ar6830p4490bk
- ar6830p4700al
- ar6830p4700am
- ar6860p5480ak
- ar8220p0113ak Demontarea, montarea plafonierei în spate
- ar8220p1000ak Demontarea, montarea calculatorului unităţii de comandă la plafon