AR60.80-G-0095E | Check tension of cab mounting torsion bar, adjust | 12.1.09 |
MODEL 405.05 with BODY 979.820
G60.80-3406-10
1 Clamping lever
2 Screw
3 Jam nut
4 Screw
5 Bearing bracket
G60.80-3418-11
A Free travel
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
1 | Remove loose objects from cab. | ||
2 | Expose electrical lines on cab rear panel | If installed. | |
3 | Unlock cab and close front passenger door | The cab must be empty. Cab must tilt upward automatically. | |
| Notes on tilting the cab | Model 405, 408, 418, 427, 436.330, 437 | |
| Check | ||
4 | Measure free travel (A) between cab lock and cab mounting | Driver and passenger door must be closed. Adjust tension of torsion bar if tree travel (A) deviates. | |
Adjust | |||
5 | Tilt cab | ||
| Notes on tilting the cab | Model 405, 408, 418, 427, 436.330, 437 | |
6 | Loosen bolt (2) | Do not remove bolt (2), otherwise the clamping lever (1) can loosen from the torsion bar. This would result in the cab falling down in an uncontrolled manner when tilting back leading to damage and injury. | |
7 | Slacken lock nut (3) | ||
8 | Adjust tree travel (A) | Screw in bolt (4) to increase free travel (A) and unscrew bolt (4) to reduce free travel (A). | |
Clamping lever (1) cannot be adjusted: | |||
Remove, install clamping lever | |||
9 | Tighten lock nut (3) | ||
10 | Tighten screw (2) | ||
11 | Lower cab | ||
| Notes on tilting the cab | Model 405, 408, 418, 427, 436.330, 437 | |
| Check | ||
12 | Check tension of torsion bar | If free travel (A) deviates, repeat steps 3 to 11. |
Test and adjustment values - Cab mounting
Documente menționate
- ah6080n000301b Indicaţii pentru rabatarea cabinei şoferului
- ar6080g0010e
- ar6080g0092e
- as6080z000101a Pericol de rănire prin prinderea şi strivirea la basculare cabină şofer