S49.20-0019-79
1 | Temperature sensor | 3 | NOxsensor | 5 | SCR catalytic converter | ||
2 | Soot particulate sensor | 4 | Clip | 6 | Decoupling element |
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Notes on self-locking nuts and bolts | ||
Note on calculation of tightening torque when using insertion or socket tools with various effective lengths | |||
| Remove/install | ||
1 | Remove injection nozzle of exhaust aftertreatment system on SCR catalytic converter (5). | ||
2 | Unscrew union nut on temperature sensor (1) and remove temperature sensor (1) on SCR catalytic converter (5). | Installation: Apply heat-resistant lubricating paste to thread of union nut on temperature sensor (1). | |
Union nut, temperature sensor upstream of SCR catalytic converter to exhaust pipe | |||
Paste, hot lubrication 1 kg, DBL 6879.20 | |||
Box wrench bit | |||
3 | Remove soot particulate sensor (2). | Installation: | |
Installation: Apply heat-resistant lubricating paste to thread of soot particulate sensor (2). | |||
Soot particulate sensor downstream of SCR catalytic converter to exhaust pipe | |||
Paste, hot lubrication 1 kg, DBL 6879.20 | |||
Box wrench bit | |||
4 | Remove NOx sensor (3). | Installation: | |
Installation: Apply heat-resistant lubricating paste to thread of NOx sensor (3). | |||
NOx sensor downstream of SCR catalytic converter to exhaust pipe | |||
Paste, hot lubrication 1 kg, DBL 6879.20 | |||
Box wrench bit | |||
5 | Remove clamp(4). | Installation: Replace clip (4). | |
Clamp, diesel particulate filter to exhaust system center | |||
6 | Remove SCR catalytic converter (5) from decoupling elements (6) and remove in downward direction. | SCR catalytic converter (5) and rear muffler are designed as one piece. | |
Helper required. | |||
| Check | ||
7 | Check decoupling elements (6) for damage. | If damage is identified, | |
| |||
Replace damaged decoupling element (6). | |||
8 | Install in the reverse order. | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
9 | Perform engine test run and check exhaust system for leak tightness in area of SCR catalytic converter (5) while doing so. |
000 589 69 03 00
Box wrench bit
000 589 71 03 00
Box wrench bit
000 589 72 03 00
Box wrench bit
Documente menționate
- ah0000n000101a Indicaţii pentru şuruburile şi piuliţele autoblocante
- ah0000p001501cw Indicaţie pentru calcularea cuplului de strângere la utilizarea de scule introduse cu diverse lungimi utile
- ah0000p500001a Indicaţii pentru evitarea defecţiunilor din cauza impurităţilor şi corpurilor străine
- ar1440s2000pd
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as4900z000101a Pericol de ardere, asfixiere şi de intoxicare în cadrul lucrărilor la instalaţia de gaze arse şi la componentele aferente. Pericol de asfixiere şi pericol de intoxicare prin inhalare de componente gazoase şi solide ale gazelor arse.