Shown on one-piece exhaust system |
1 | Rear muffler |
2 | Bracket |
3 | Bracket |
T1 | Separation point |
P49.10-A057-75
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on self-locking nuts and bolts | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Lift vehicle with lifting platform. | ||
2 | Secure rear muffler (1) against falling down. | ||
| 000 588 11 62 00 Major assembly mount | ||
| 000 588 10 62 00 Support plate | ||
3.1 | Cut off rear muffler (1) at separating point (T1). | If a one-piece exhaust system is installed. | |
Separating point (T1) is marked. | |||
Installation: Install a new clamp. | |||
Commercially available devices/tools | |||
Clamp, front exhaust system to rear muffler | |||
3.2 | Remove clamp at separating point (T1). | If a two-piece exhaust system is installed. | |
Installation: Replace clamp. | |||
Clamp, front exhaust system to rear muffler | |||
4 | Detach rear muffler (1) from brackets (2, 3) and remove. | Wet elastomer bearings with lubricant. | |
Lubricant, rubber assembly 1 l | |||
| Check | ||
5 | Check elastomer bearings for wear and damage. | If there is a problem: | |
| |||
Replace corresponding elastomer bearing. | |||
| Clean | ||
6 | Remove combustion and corrosion residues at separating point (T1). | ||
7 | Install in the reverse order. | ||
8 | Check installation position and unobstructed movement of exhaust system. | If there is a problem, | |
| |||
Re-align the exhaust system. | |||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
9 | Perform engine test run and check exhaust system for leak tightness. |
Documente menționate
- ah0000n000101a Indicaţii pentru şuruburile şi piuliţele autoblocante
- ah0000p500001a Indicaţii pentru evitarea defecţiunilor din cauza impurităţilor şi corpurilor străine
- ar0060p1006a Ridicare, coborâre autovehicul cu elevator
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as0000z001701a Pericol de rănire prin tăieturi respectiv zgârieturi provocate de componentele cu muchii ascuţite ale autovehiculului
- as4900z000101a Pericol de ardere, asfixiere şi de intoxicare în cadrul lucrărilor la instalaţia de gaze arse şi la componentele aferente. Pericol de asfixiere şi pericol de intoxicare prin inhalare de componente gazoase şi solide ale gazelor arse.
- ws0100p0092b
- ws2600p3309b