ws0100p0092b

000 588 11 62 00 Major assembly mount

Tip ws · temă 01.00 · versiune 0107 · 2018-10-18

Valabil pentru: Model all (4xWD, BUS, CAR, Heavy transporter, Light transporter, TRUCK, UNIMOG, smart)

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 01 Motor complet, sistem de ventilaţie motor, chiulasă, carter motor › 01.00 Generalităţi — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

EinPAS 15 Motor › 15.15 Motor cu ardere internă complet/Carcasă motor/Mecanism bielă-manivelă › 15.15.1 Informaţie de bază — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

EinPAS 17 Grup motopropulsor/Punte › 17.20 Cutie de viteze › 17.20.1 Informaţie de bază — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

Valabil și pentru motoare/cutii de viteze: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

WS01.00-P-0092B

000 588 11 62 00 Major assembly mount

18.10.2018

Model

all (4xWD, BUS, CAR, Heavy transporter, Light transporter, TRUCK, UNIMOG, smart)

000 588 11 62 00 Major assembly mount

Verwendung in FG 01/03/05/07/08/14/15/22/25/26/27/28/31/32/33/35/41/42/46/47/49/54/55/61/62/72/83/Satz B


Purpose:
Universal transmission jack for lifting and for mounting and disassembly of major assemblies or other components.
Reference information:
This criteria catalog serves to provide support for selection of variants of workshop equipment available on the free market. It just describes the minimum requirement for fulfilling the Mercedes-Benz standard. There is therefore no reference made to manufacturer specific equipment or devices.

000 588 11 62 00

Note:

Observe for ordering purposes that the standard dimension is 35 mm; this can be achieved if necessary using an adapter.

Use in combination with a suitable attachment (for example: transmission plate).

Minimum requirements:

Mercedes-Benz standard diameter for mounting hole: 35 mm

Minimum load carrying capacity for transporter: 1.0 t

Minimum load carrying capacity for commercial vehicle: 2.0 t