W46.20-1108-09
1 | Steering gear | 3 | Test connection | 5 | Hose | ||
2 | T-piece | 4 | Cap | 6 | Pressure gage |
Danger | Risk of death caused by vehicle slipping or toppling off during lifting | Only lift vehicle at the lift support points specified by the vehicle manufacturer. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Warning | Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid. | Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses. | |
Warning | Danger of injury to eyes caused by steering oil emerging at high pressure. Danger of poisoning caused by swallowing steering oil | The setting screws for the hydraulic steering limiters must be turned in by at least three rotations. Wear protective gloves, protective clothing and safety glasses. | |
Warning | Risk of injury from being trapped in the swivel range of steered axles | Ensure that no persons or objects are in the swivel range of all steered axles when turning the steering wheel. Do not stand in the swivel range of the additional steering axle when the engine is running. | |
Warning | Risk of injury to skin or eyes from hot hydraulic fluid spraying out under high pressure. Risk of burn injuries from contact with components heated by hot hydraulic fluid. Risk of poisoning from swallowing hydraulic fluid | Do not make any technical modifications to the pressure gauge or the test equipment. Check the pressure gauge and test equipment for mechanical damage each time prior to use. Observe the flow diagram when connecting the test equipment. Wear protective gloves, protective clothing and safety glasses. | |
Warning | Risk of accident and injury caused by diagnostic equipment in vehicle while traveling | Never use the test equipment to verify the delivery rate and oil pressure of the power steering pump or the pressure gauge while driving. | |
Topical note | Special instructions for lifting and supporting vehicle | ||
Topical note | Notes on maintenance and repair work | ||
| Check | ||
1 | Move vehicle to driving level using level control system operating unit. | ||
2 | Move front wheels to straight-ahead position. | ||
3 | Secure vehicle to prevent it moving away. | ||
4 | Position front wheels centrally on turn plates. | ||
5 | Open maintenance flap. | ||
6 | Connect hose (5) to manometer (6). | Pressure gage | |
Hose | |||
7 | Unscrew cap (4) from test connection (3). | ||
8 | Connect hose (5) at test connection (3). | ||
9 | Start engine and run at idle speed. | ||
10 | Turn steering to left or right several times using normal force of the hand until steering gear oil temperature of approx. 50 °C is reached in the steering. | | |
11 | Turn steering wheel left up to mechanical end stop using normal force of the hand, read off pressure at manometer (6), and release steering wheel again. | | |
12 | Note down measured pressure. | ||
13 | Turn steering wheel to right up to mechanical end stop using normal force of the hand, read off pressure at manometer (6), and release steering wheel again. | | |
14 | Note down measured pressure. | ||
15 | Move front wheels to straight-ahead position. | ||
16 | Switch off engine. | ||
17 | Compare noted pressures with specified adjustment pressure of steering limitation. | Adjustment pressure for steering limiter | |
If noted pressures do not match specified adjustment pressure of steering limitation: | |||
| |||
Set hydraulic steering limiters. | |||
Adjustment pressure for steering limiter | |||
Screw-in depth of setting screw for hydraulic steering limiter (distance between bolt head of setting screw and contact surface of bolt head of screw plug) | |||
Screw plug for setting screw of hydraulic steering limiter to steering gear | |||
Pressure gage | |||
Hose | |||
18 | Detach hose (5) from test connection (3). | Collect escaping oil in suitable container. | |
19 | Screw cap (4) onto test connection (3). | ||
20 | Remove hose (5) from manometer (6) and seal all connections. | ||
21 | Raise vehicle at front axle, remove all turn plates, and lower vehicle back onto floor. | ||
22 | Check steering gear oil level and correct if necessary. | Steering gear oil | |
23 | Close maintenance flap. | ||
24 | Conduct a road test. | During the test drive, check the overall steering ability of the vehicle. |
Test values for steering gear |
Number | Designation | Model 956 without code C6L | Model 956 with code C6L | |
BE46.20-N-1001-01K | Screw-in depth of setting screw for hydraulic steering limiter (distance between bolt head of setting screw and contact surface of bolt head of screw plug) | bar | 4 | 4 |
For picture, see | ||||
Test values for steering gear |
Number | Designation | Model 956 without code C6L | Model 956 with code C6L | ||||
BE46.20-N-1002-01K | Adjustment pressure for steering limiter | Vehicle unladen | Steering to left | Specified value | bar | 40 (+10) | 70 (+10) |
at engine speed | 1/min | 800 | 800 | ||||
Steering to right | Specified value | bar | 40 (+10) | 70 (+10) | |||
at engine speed | 1/min | 800 | 800 | ||||
Load vehicle | Steering to left | Specified value | bar | 40 (+10) | 70 (+10) | ||
at engine speed | 1/min | 800 | 800 | ||||
Steering to right | Specified value | bar | 40 (+10) | 70 (+10) | |||
at engine speed | 1/min | 800 | 800 |
400 589 01 91 00
Hose
000 589 06 21 00
Pressure gage
Documente menționate
- ah0060n010001b Indicaţii pentru ridicare şi aşezarea pe cric
- ah4620n000101h Indicaţii pentru lucrări de revizie şi reparaţie
- ar0060w200001h Poziţionare autovehicul pe plăci turnante
- ar4620w110001ne
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as0000z001301a Pericol de rănire la piele sau ochi prin lichid de frână pulverizat afară sub presiune mare. Pericol de otrăvire prin gustarea de lichid de frână
- as0000z003201a Pericol de moarte prin alunecarea sau bascularea autovehiculului la ridicare
- as4600z000101a Pericol de rănire a ochilor prin uleiul de direcţie care ţâşneşte cu presiune mare. Pericol de intoxicare prin înghiţire de ulei de direcţie
- as4600z000201a Pericol de rănire prin prindere la staţionarea în zona de virare a punţilor directoare
- as4600z000301a Pericol de rănire a pielii şi ochilor cu ulei hidraulic fierbinte pulverizat afară cu presiune înaltă. Pericol de arsuri la contactul cu componente încălzite de ulei hidraulic fierbinte. Pericol de intoxicare prin consum de ulei hid
- as5840z000101b Pericol de accident şi pericol de rănire prin aparate de diagnoză în cadrul regimului de rulare