W43.40-1108-09
1 | Rotor | 3 | Transmission output flange | 5 | Adapter | ||
2 | Propeller shaft | 4 | Bolts |
Danger | Risk of death caused by vehicle slipping or toppling off during lifting | Only lift vehicle at the lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Danger | Risk of death for persons with implants caused by work on permanent magnet retarder. Risk of injury caused by burns due to contact with hot rotor. | As a safe distance from the permanent magnet retarder, a minimum distance of 30 cm is to be maintained between the permanent magnet retarder and the body parts of the affected person for people with implants. | |
Topical note | Special instructions for lifting and supporting vehicle | ||
Topical note | Notes on self-locking nuts and bolts | ||
Notes on safety-relevant components | |||
| Remove | ||
1 | Use right multifunction lever to set retarder control to position "0". | ||
2 | Switch off ignition. | ||
3 | Remove soundproofing. | ||
4 | Loosen bolts (4). | Do not yet remove screws (4). | |
5.1 | Remove propeller shaft (2). | For vehicles with single piece propeller shaft (2) | |
5.2 | Detach propeller shaft (2) from transmission output flange (3). | For vehicles with two-piece propeller shaft (2) | |
6 | Unscrew and remove screws (4) and remove rotor (1) from adapter (5). | ||
| Install | ||
7 | Attach rotor (1) to adapter (5). | Do not tighten bolts (4) yet. | |
8.1 | Install propeller shaft (2). | For vehicles with single piece propeller shaft (2) | |
Propeller shaft to flange connection | |||
8.2 | Attach propeller shaft (2) to transmission output flange (3). | For vehicles with two-piece propeller shaft (2) | |
Propeller shaft to flange connection | |||
Screw/bolt, intermediate bearing to bracket | |||
9 | Tighten screws (4). | Bolt, rotor to flange adapter | |
10 | Install soundproofing. |
Documente menționate
- ah0000n000101a Indicaţii pentru şuruburile şi piuliţele autoblocante
- ah0000z001901a Indicaţii referitoare la componente relevante din punct de vedere al siguranţei
- ah0060n010001b Indicaţii pentru ridicare şi aşezarea pe cric
- ar4110w005014na
- ar4110w005015na
- as0000z000901a Pericol de rănire prin prinderea sau strivirea, în caz extrem prin tăierea membrelor în timpul manipulării sistemului mecanic
- as0000z003201a Pericol de moarte prin alunecarea sau bascularea autovehiculului la ridicare
- as4340z000101a Pericol de moarte prin lucrări la retarder-ul cu magnet permanent pentru grupele de persoane cu implanturi. Pericol de rănire prin arsuri ce pot rezulta prin atingerea rotorului fierbinte.