P20.00-2236-06
1 Cap
2 Expansion reservoir
3 Filling device
4 Adapter
5 Drain plug
6 Radiator
Modification notes
Draining | |||
Danger! | Risk of injury to skin and eyes suffering scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage bottles. Wear protective gloves, protective clothing and eye protection. | |
| Notes on coolant | ||
1 | Open engine hood | See Operator's Manual | |
2 | Unscrew the cap (1) on the expansion reservoir (2) | Rotate one revolution counterclockwise, drain overpressure, then unscrew cap of cooling system (1). | |
3 | Remove lower engine compartment paneling | ||
4 | Unscrew drain plug (5) at radiator (6) and drain coolant | Collect coolant | |
Filling | |||
5 | Screw tight drain plug (5) at radiator (6) | ||
6 | Install lower engine compartment paneling. | ||
7 | Connect filling device (3) with adapter (4) to expansion reservoir (2), evacuate cooling system and then fill | Observe instruction manual from filling device (3) manufacturer. | |
| |||
| |||
| |||
8 | Screw cap (1) onto expansion reservoir (2) | ||
| Checking | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns when working in engine during starting procedure | Secure vehicle to prevent it from moving. | |
9 | Carry out engine test run | Until the cooling fan is switched on. | |
10 | Check coolant level, adjust to correct level if necessary. | ||
| Engine cooling system - inspect fluid level, adjust to correct level. Inspect anticorrosion/ antifreeze protection, adjust to correct concentration |
Cooling system
Number | Designation | Engine | ||
BF20.00-P-1001-02T | Cooling system | Total capacity | Liters | 6.6 |
Capacity of anticorrosion/ | Liter | 3.3 | ||
Filling capacity of anticorrosion/ | Liter | 3.6 | ||
Specifications for Operating Fluids | Sheet | |||
454 589 03 91 00
Adapter
Filling device
450 589 20 63 00
Documente menționate
- ah2000n208001a Indicaţii pentru lichid de răcire
- ap2000p2010fg
- ar6120p1105ff
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as2000z000101a Pericol de rănire la piele şi ochi prin opărire cu lichid de răcire fierbinte pulverizat afară. Pericol de otrăvire datorită înghiţirii lichid de răcire.