P20.00-2236-06
1 Cap
2 Expansion reservoir
3 Filling device
4 Adapter
5 Drain plug
6 Radiator
Modification notes
Draining | |||
Danger! | Risk of injury to skin and eyes suffering scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage bottles. Wear protective gloves, protective clothing and eye protection. | |
| Notes on coolant | ||
1 | Open engine hood | See Operator's Manual | |
2 | Unscrew the cap (1) on the expansion reservoir (2) | Rotate one revolution counterclockwise, drain overpressure, then unscrew cap of cooling system (1). | |
3 | Remove lower engine compartment paneling | ||
4 | Unscrew drain plug (5) at radiator (6) and drain coolant | Collect coolant | |
Filling | |||
5 | Screw tight drain plug (5) at radiator (6) | ||
6 | Install lower engine compartment paneling. | ||
7 | Connect filling device (3) with adapter (4) to expansion reservoir (2), evacuate cooling system and then fill | Observe instruction manual from filling device (3) manufacturer. | |
| |||
| |||
| |||
8 | Screw cap (1) onto expansion reservoir (2) | ||
| Checking | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns when working in engine during starting procedure | Secure vehicle to prevent it from moving. | |
9 | Carry out engine test run | Until the cooling fan is switched on. | |
10 | Check coolant level, adjust to correct level if necessary. | ||
| Engine cooling system - inspect fluid level, adjust to correct level. Inspect anticorrosion/ antifreeze protection, adjust to correct concentration |
Cooling system
Number | Designation | Engine | ||
BF20.00-P-1001-02T | Cooling system | Total capacity | Liters | 6.6 |
Capacity of anticorrosion/ | Liter | 3.3 | ||
Filling capacity of anticorrosion/ | Liter | 3.6 | ||
Specifications for Operating Fluids | Sheet | |||
454 589 03 91 00
Adapter
Filling device
450 589 20 63 00
Referenced documents
- ah2000n208001a Notes on coolant
- ap2000p2010fg Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration
- ar6120p1105ff Remove/install bottom engine compartment paneling
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
- as2000z000101a Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.