1 | Drain valve |
D20.00-A000-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Notes on coolant | ||
Notes on coolant level | |||
Drain off | |||
1 | Raise vehicle. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
2 | Open cap slowly, relieve overpressure and unscrew from coolant expansion reservoir. | ||
3 | Attach drain hose at drain valve (1). | Cooler vacuum filling device | |
4 | Open drain valve (1) and drain off coolant. | ||
5 | Close drain valve (1). | Drain screw at cooler (reference value) | |
6 | Remove drain hose. | ||
Pour in | |||
7 | Pour in coolant and bleed engine cooling system. | ||
Coolant | |||
Mixture ratio for coolant | |||
Cooler vacuum filling device | |||
Test cap | |||
| Check | ||
8 | Check engine cooling system for leak tightness. | ||
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
9 | Perform engine test run; in this connection, check engine cooling system for proper operation and leak tightness. |
210 589 00 91 00
Test cap
285 589 00 21 00
Cooler vacuum filling device
Documente menționate
- ah0000p500001a Indicaţii pentru evitarea defecţiunilor din cauza impurităţilor şi corpurilor străine
- ah0060n010001ts Indicaţii pentru ridicare şi aşezarea pe cric
- ah2000n208001a Indicaţii pentru lichid de răcire
- ah2000p114201cw Indicaţii pentru nivelul lichidului de răcire
- ar0060d100004ts
- ar2000d1010tsc
- ar2000d114203tsc
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as0000z001001a Pericol de moarte prin alunecare sau basculare a autovehiculului de pe elevator
- as2000z000101a Pericol de rănire la piele şi ochi prin opărire cu lichid de răcire fierbinte pulverizat afară. Pericol de otrăvire datorită înghiţirii lichid de răcire.
- as4900z000101a Pericol de ardere, asfixiere şi de intoxicare în cadrul lucrărilor la instalaţia de gaze arse şi la componentele aferente. Pericol de asfixiere şi pericol de intoxicare prin inhalare de componente gazoase şi solide ale gazelor arse.