Commercially available tools
Number | Designation | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P63.10-3978-09
Shown on model 251 without panoramic glass roof with top sliding roof, code 413 and without power glass tilting/sliding roof, code 414
1 Grind mating surfaces down to bare metal in cross-hatched areas A, B, DA and EA on one side.
2 Grind mating surfaces down to bare metal in remaining cross-hatched areas on both sides.
3 Remove grinding and cutting chips with wet/dry vacuum cleaner.
4 Coat insides of spot welding and rivet flange (except areas A, B and DA) with zinc dust paint.
P63.10-3972-09
Shown on model 251 without panoramic glass roof with top sliding roof, code 413 and without power glass tilting/sliding roof, code 414.
5 Grind mating surfaces down to bare metal in remaining cross-hatched areas on both sides.
6 Remove grinding and cutting chips with wet/dry vacuum cleaner.
7 Coat insides of spot weld flange (except area IB) with zinc dust paint.