ar4020p0331h

Checking rear axle camber

Tipo ar · tema 40.20 · versão 0102 · 2006-12-12

Válido para: MODEL 240

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 2 Chassí › 40 Rodas, alinhamento › 40.20 Alinhamento do chassí — Série 240

EinPAS 20 Trem de rodagem › 20.10 Alinhamento da suspensão › 20.10.20 Diagnóstico/inspeção/medição/ajuste — Série 240

AR40.20-P-0331H

Checking rear axle camber

19.10.06

MODEL 240

	Checking
1	Check vehicle level at front and rear axles using electronic inclinometer		AR40.20-P-0301H
2	Checking rear axle camber	 The camber on the rear axle is not adjustable.
		If substantial deviations in the rear axle camber are found, the cause may be one of the following:  Excessive difference in the vehicle level between the left and right sides of the vehicle.  Accident damage to the frame floor. Discrepancies in the levels of the mounting points for the rear axle carrier between right and left body side. Experience shows that bending caused by an accident also has an effect on the toe.
		Camber at vehicle level	*BE40.20-P-1001-09HA
		Observe permissible difference in rear axle camber between right and left sides of the vehicle	*BE40.20-P-1002-09HA

Test values for rear axle camber

Number	Designation			Model 240


BE40.20-P-1001-09HA	Camber at vehicle level	-0.9°	°	-1° 18' (30')
		-1.4°	°	-1° 24' (30')
		-1.9°	°	-1° 30' (30')
		-2.4°	°	-1° 36' (30')
		-2.9°	°	-1° 42' (30')
BE40.20-P-1002-09HA	Permissible difference in rear axle camber between right and left sides of the vehicle		°	30'

Documentos referenciados

ar4020p0301h Verificar o nível do veículo no eixo dianteiro e traseiro com clinômetro eletrônico, se necessário ajustar