AR26.60-S-0072SD | Remove/install radial shaft seal of shift rod | 21.4.09 |
TRANSMISSION 716.6 in MODEL 636, 639.601 /603 /605 /701 /703 /705 /711 /713 /811 /813 /815
Shown on transmission 716 without permanent all-wheel drive, code ZG2
1 Transmission
2 Securing pin
3 Connecting piece
4 Radial shaft seal
S26.60-4509-03
| Remove/install | ||
1 | Remove transmission (1) | For vehicles with permanent all-wheel drive, code ZG2 the transfer case remains on the transmission. | |
2 | Remove shift arm with relay lever | ||
3 | Remove roll pin (2) from shift rod | ||
4 | Detach connecting piece (3) from shift rod | ||
5 | Remove radial shaft sealing ring (4). | To prevent leaks, do not damage the seat of the radial shaft sealing ring (4) in the transmission (1). | |
Installation: Replace radial shaft sealing ring (4) and moisten sealing lip using oil. | |||
Drift | |||
6 | Install in the reverse order | ||
| Check | ||
7 | Check transmission oil level, correct if necessary | ||
| Manual transmission - oil change |
Drift
210 589 02 15 00
Documentos referenciados
- ap2600d2601a Caixa de mudanças mecânica - troca de óleo
- ar2610s0020sd Remover e instalar a caixa de mudanças
- ar2660s007201sd
- ar2660s6660sd