AR15.10-S-2000B | Removing and installing camshaft Hall sensor | 17.10.98 |
ENGINE 611.980 in MODEL 638.094 /194 /294
with CODE (MQ4) Engine OM611 DE22 LA (75 kW)
with CODE (MQ5) Engine OM611 DE22 LA (90 kW)
ENGINE 611.980 in MODEL 638.094 /194 with CODE (MQ3) Engine OM611 DE22 A (60 kW)
S15.10-2506-06
1 Connector
2 Bolt
B48 Camshaft Hall sensor
| Removing, installing | ||
1 | Remove trim panel of cylinder head cover | ||
2 | Unplug connector (1) at camshaft Hall sensor (B48) | ||
3 | Unscrew bolt (2) of camshaft Hall sensor (B48) at cylinder head cover | | |
| |||
4 | Remove camshaft Hall sensor (B48) at cylinder head cover | Installation: replace O-ring | |
5 | Install in the reverse order | ||
Danger! | Risk of accident as a result of vehicle starting off when engine running. Risk of injury as a result of bruises and burns if you insert your hands into engine when it is being started or when it is running. | Secure vehicle to prevent it starting off. Wear closed and close-fitting work clothes. Do not grasp hot or rotating parts. | |
6 | Run engine and inspect for leaks |
Position sensor
Number | Designation | Engine 611.980 | |
BA15.10-N-1001-03A | Bolt of camshaft Hall sensor to cylinder head cover | Nm | 11 |
External torx set
001 589 76 09 00
Documentos referenciados
- ar0120s5015a
- as0000z000501a Risco de acidente pelo movimento involuntário com o motor em funcionamento. Risco de lesão por esmagamento e queimadura no contato durante o procedimento de partida ou com o motor em funcionamento