AR15.10-S-2000B | Removing and installing camshaft Hall sensor | 17.10.98 |
ENGINE 611.980 in MODEL 638.094 /194 /294
with CODE (MQ4) Engine OM611 DE22 LA (75 kW)
with CODE (MQ5) Engine OM611 DE22 LA (90 kW)
ENGINE 611.980 in MODEL 638.094 /194 with CODE (MQ3) Engine OM611 DE22 A (60 kW)
S15.10-2506-06
1 Connector
2 Bolt
B48 Camshaft Hall sensor
| Removing, installing | ||
1 | Remove trim panel of cylinder head cover | ||
2 | Unplug connector (1) at camshaft Hall sensor (B48) | ||
3 | Unscrew bolt (2) of camshaft Hall sensor (B48) at cylinder head cover | | |
| |||
4 | Remove camshaft Hall sensor (B48) at cylinder head cover | Installation: replace O-ring | |
5 | Install in the reverse order | ||
Danger! | Risk of accident as a result of vehicle starting off when engine running. Risk of injury as a result of bruises and burns if you insert your hands into engine when it is being started or when it is running. | Secure vehicle to prevent it starting off. Wear closed and close-fitting work clothes. Do not grasp hot or rotating parts. | |
6 | Run engine and inspect for leaks |
Position sensor
Number | Designation | Engine 611.980 | |
BA15.10-N-1001-03A | Bolt of camshaft Hall sensor to cylinder head cover | Nm | 11 |
External torx set
001 589 76 09 00
Referenced documents
- ar0120s5015a Removing, installing trim panel of cylinder head cover
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.