ar0940s6020sd

Remove/install turbocharger

Tipo ar · tema 09.40 · versão 0203 · 2010-04-20

Válido para: ENGINES 646 in MODEL 636, 639

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 1 Motor › 09 Aspiração de ar, turboalimentação › 09.40 Turbo compressor — Série 636 · Série 639 · Série 646

EinPAS 15 Motor › 15.30 Aspiração de ar/sobrealimentação › 15.30.51 turbocompressor — Série 636 · Série 639 · Série 646

AR09.40-S-6020SD

Remove/install turbocharger

8.4.10

ENGINES 646 in MODEL 636, 639

Remove/install turbocharger

S09.40-4501-09

Shown on engine 646.982 without CODE (KA1) Particulate filter

1 Charge air hose

5 Bolts

4 Vacuum hose

Remove/install

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Danger!

Risk of death caused by vehicle slipping or toppling off the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Remove air filter housing

AR09.10-S-1150S

2

Remove holder for electrical connector for O2 sensor on cylinder head

Only for model 636 with code (MF8) Low-pollutant engine according to EU3 group 3,

with code (MF4) Low-pollutant engine according to EU4 group 3,

Model 639 with code (MF4) Low-pollutant engine according to EU4 group 3

3

Remove oil feed line of turbocharger

AR09.40-S-6022SD

4

Remove charge air hose (1) to turbocharger

5

Remove oil return line of turbocharger

AR09.40-S-6021SD

6

Detach rear lower engine compartment paneling

Only on model 636,

Model 639.7/8 as of vehicle identification number (VIN) 055347

AR61.20-S-1105-03S

7

Remove primary catalytic converter on turbocharger

AR49.10-S-5510SD

8.1

Remove vacuum hose (4)

Only with engine 646.982/983

8.2

Disconnect electrical connector on turbocharger

Only with engine 646.980/981

9

Remove bolts (5)

Installation: Replace bolts (5).

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

*BA09.40-N-1001-01O

10

Remove turbocharger upwards

Clean

11

Clean sealing surfaces

12

Install in the reverse order

Check

13

Check engine oil level, correct if necessary

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

14

Check for leaks with engine running

Visual inspection only.

Turbocharger

Number

Designation

Engine 646
in model 636, 639

BA09.40-N-1001-01O

Flange connection, exhaust manifold to turbocharger

Nm

30

Documentos referenciados