ar0716l1090va

Remove/install common rail diesel injection (CDI) coolant temperature sensor

Tipo ar · tema 07.16 · versão 0100 · 2003-03-13

Válido para: ENGINE 668.914 in MODEL 414.700

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 1 Motor › 07 Preparação da mistura › 07.16 Sistema de injeção diesel Common-Rail — Série 414 (modelos 700) · Série 668 (modelos 914)

EinPAS 15 Motor › 15.25 Sistema de arrefecimento do motor › 15.25.12 Sensor/interruptor/chicote — Série 414 (modelos 700) · Série 668 (modelos 914)

AR07.16-L-1090VA

Remove/install common rail diesel injection (CDI) coolant temperature sensor

26.7.01

ENGINE 668.914 in MODEL 414.700

Remove/install common rail diesel injection (CDI) coolant temperature sensor

L07.16-0021-11

1 ECT sensor connector

2 Retaining clamp

3 Sealing ring

B11/4 Coolant temperature sensor

Remove/install

1

Separate plug connection of coolant temperature sensor (1)

Danger!

Risk of injury to skin and eyes from scalding with hot coolant which splashes out. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage bottles.

Wear protective gloves, protective clothing and eye protection.

AS20.00-Z-0001-01A

2

Drain coolant

At crankcase.

AR20.00-L-1142VA

3

Use a screwdriver to press out retaining clamp (2)

4

Remove coolant temperature sensor (B11/4)

Installation:Replace seal (3).

5

Install in the reverse order

6

Inspect cooling system for leaks

AR20.00-L-1010VA

Documentos referenciados