ar0018t0001c

Compressed-air tank removal and installation

Tipo ar · tema 00.18 · versão 0102 · 2005-07-12

Válido para: MODELS NMB613.364/365

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 0 Completo › 00 Veículo completo › 00.18 Pneumática do veículo — Série 613 (modelos 364, 365)

EinPAS 21 freios/sistemas de vácuo/sistema de ar comprimido › 21.35 sistema de ar comprimido › 21.35.60 Reservatório de ar comprimido — Série 613 (modelos 364, 365)

AR00.18-T-0001C

Compressed-air tank removal and installation

28.7.00

MODELS NMB613.364/365

Compressed-air tank removal and installation

T00.18-0002-04

Air tank locations

1 Compressed-air reservoir

2 Compressed-air reservoir

3 Compressed-air reservoir

4 Compressed air reservoir

X Direction of travel

Remove/install

1

Blow off compressed-air system's supply air

2.1

Remove spare wheel

Only necessary when removing compressed air reservoir (1) in front of front axle.

See owner's manual.

2.2

Remove floor covering from passenger compartment

Only when removing compressed-air tank (2) above the front axle.

2.3

Open service-access hatch on the left side of the vehicle

Only when removing compressed-air tank (3) behind the front axle.

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

2.4

Raise vehicle.

Only when removing compressed-air tank (4) in front of the front axle.

AR00.60-T-1000B

3

Detach compressed air lines connector from compressed air reservoir (1, 2, 3, 4)

Only on compressed air reservoir (1, 2, 3, 4) to be removed.

For"VOSS 230" compressed-air
connector.

AR42.10-W-0900A

For "VOSS 232" (NG 8, NG 12)
or "Schäfer SDF" (NG 6) compressed-air connector.

AR42.10-W-0900C

4

Detach bracket of compressed air reservoir (1, 2, 3, 4)

Only on compressed air reservoir (1, 2, 3, 4) to be removed.

5

Remove compressed air reservoir (1, 2, 3, 4)

Only compressed air reservoir (1, 2, 3, 4) to be removed.

6

Install in the reverse order

Documentos referenciados