ar0000t8010d

Perform vehicle body wash and underbody wash

Tipo ar · tema 00.00 · versão 0100 · 2006-05-02

Válido para: MODEL 436.330 with BODY 436.860

Não disponível em “pt”; apresentado em Inglês.

Onde se situa

Grupo funcional 0 Completo › 00 Veículo completo › 00.00 Generalidades — Série 436 (modelos 330, 860)

EinPAS 10 Serviço › 10.15 Limpeza/conservação › 10.15.30 Carroçaria/compartimento do motor/pintura — Série 436 (modelos 330, 860)

AR00.00-T-8010D

Perform vehicle body wash and underbody wash

19.4.06

MODEL 436.330 with BODY 436.860

Perform vehicle body wash and underbody wash
Perform vehicle body wash and underbody wash
Perform vehicle body wash and underbody wash

G97.20-3158-01

G97.20-3149-01

G97.20-3159-01

Perform vehicle body wash and underbody wash
Perform vehicle body wash and underbody wash

G97.20-3160-01

G97.20-3161-01

Perform vehicle body wash and underbody wash
Perform vehicle body wash and underbody wash

G97.20-3151-01

G97.20-3152-01

Figure items, etc.

Work instructions

Danger!

Risk of injury caused by being caught or pinched as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.

AS60.80-Z-0001-01A

Notes on tilting the cab

AH60.80-N-0003-01B

Tilt cab into repair position

AR60.80-T-0010U

Tilt and secure platform

See manufacturer's operating instructions.

Lubrication points

After performing the body wash and underbody wash, check lubrication points, relubricate if necessary.

AP00.20-T-0020D

Check state of corrosion protection on chassis

On chassis without Tectyl underfloor protection, code (Y64)

AR97.20-T-2000D

On chassis with Tectyl underfloor protection, code (Y64), the given corrosion protection must be checked at regular intervals and, if necessary, refreshed.

1

High-pressure cleaner wand

When performing the body wash and underbody wash, the water temperature must not be higher than 40 °C and the spray pressure not greater than 30 bar.
Otherwise the corrosion protection or the coat of paint may be damaged.

Observe distance between high-pressure cleaner wand (1) and the surface to be cleaned.
The distance must not be less than 30 cm.

3

Radiator

If there are any persistent deposits, keep a sufficient distance between the high-pressure cleaner wand (1) and the radiator (3), otherwise the radiator (3) slats may be damaged.

For light to standard deposits on the radiator (3), a water hose (2) should suffice for cleaning purposes.

Documentos referenciados