Remove/install front passenger bench seat frame

AR91.10-D-5320TS

Remove/install front passenger bench seat frame

19.06.2018

Model

907, 910

with code S23 (Co-driver's seat double seat)

1

Frame

2

Electrical wiring harness

3

Retaining clips

4

Retaining clips

5

Bracket

6

Bracket

7

Rivet

8

Bracket

9

Screw

10

Electrical connector

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove head restraint guides from front passenger bench seat.

AR91.16-D-0055TS

2

Remove left seat belt buckle from front passenger bench seat.

AR91.40-D-1529TS

3

Remove right seat belt buckle from front passenger bench seat.

AR91.40-D-1530TS

4

Remove front passenger bench seat.

AR91.10-D-1035TS

5

Remove seat cushion padding from front passenger bench seat.

AR91.10-D-5036TS

6

Remove seat occupancy recognition from front passenger bench seat.

Model 907, 910 with code J55 (Seat belt warning system for front passenger seat)

AR91.60-D-0009TS

7

Remove seat belt from front passenger bench seat.

AR91.40-D-1040TS

8

Remove seat backrest padding from front passenger bench seat.

AR91.10-D-1099TS

9

Remove seat heating control unit.

Model 907, 910 with code H15 (Seat heating for front passenger)

AR91.30-D-0030TS

10

Remove electrical wiring harness (2) from frame (1).

 To do so, depending on equipment involved, remove retaining clips (3, 4) and holders (5) from frame (1). Check retaining clips (3, 4) and holders (5) for damage.

 Clip remover

*452589016300

If retaining clips (3, 4) and holders (5) are damaged,



Replace retaining clips (3, 4) and holders (5).

11

Remove bracket (6).

Model 907, 910 with code H15 (Seat heating for front passenger)

General information on riveting

AH60.00-P-0003-01N

 Commercially available devices/tools
Hand drill
Hand riveter

 To do so, remove rivet (7).

12

Remove holder (8).

 To do s, remove bolt (9).

13

Remove electrical connector (10) from holder (8).

If the holder (8) or electrical connector (10) is replaced.

 To do so, release electrical connector (10) on holder (8).

14

Install in the reverse order