Remove/install front seat frame

AR91.10-D-5319TS

Remove/install front seat frame

19.06.2018

Model

907, 910

except code SF1 (Electrically adjustable driver's seat)

except code SF2 (Electrically adjustable co-driver's seat)

Shown with code SB3 (Suspension seat comfort version, driver's seat), code H16 (Seat heating for driver), code SH1 (Driver thorax/pelvis side airbag), code J58 (Seat belt warning system for driver's seat) and code SE5 (Driver's seat lumbar support)

1

Electrical wiring harness

2

Retaining clips

3

Seat frame

4

Catch hook

5

Catch hook

6

Electrical connector

7

Electrical connector

8

Bracket

9

Catch hook

10

Bolt (with code SB3 (Suspension seat comfort version, driver's seat) or code SB4 (Suspension seat comfort version, front passenger seat))

Shown with code SB1 (Comfort, driver's seat), code H16 (Seat heating for driver), code SH1 (Driver thorax/pelvis side airbag), code J58 (Seat belt warning system for driver's seat) and code SE5 (Driver's seat lumbar support)

8

Bracket

9

Catch hook

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove front seat.

AR91.10-D-1000TS

2

Remove seat backrest frame from front seat.

AR91.10-D-5318TS

3

Remove seat cushion padding from front seat.

Model 907, 910 except code H15 (Seat heating for front passenger) except code H16 (Seat heating for driver)

AR91.10-D-5040TS

Model 907, 910 with code H15 (Seat heater for front passenger) Model 907, 910 with code H16 (Seat heater for driver)

AR91.10-D-5040TSH

4

Remove seat occupancy recognition from front passenger seat.

Model 907, 910 with code J55 (Seat belt warning system for front passenger seat)

AR91.60-D-0008TS

5

Remove seat heating control unit.

Model 907, 910 with code H15 (Seat heater for front passenger) Model 907, 910 with code H16 (Seat heater for driver)

AR91.30-D-0030TS

6

Remove electrical wiring harness (1) from seat frame base (3).


Note installation position of electrical wiring harness (1).
Otherwise, the electrical wiring harness (1) may be damaged.

 The electrical wiring harness (1) varies depending on the equipment installed.

 To do so, remove retaining clips (2) depending on the equipment installed.
Check retaining clips (2) for damage.

 Clip remover

*452589016300

If the retaining clips (2) are damaged,



replace the retaining clips (2).

7

Remove seat frame base (3).

 To do so, release catch hooks (4, 5) of electrical connectors (6, 7).

8

Remove holder (8).

If the holder (8) or seat frame base (3) is to be replaced.

 The holder (8) has different variants depending on the equipment installed.

 To do so, release catch hooks (9).
The catch hooks (9) differ depending on the equipment installed.

 Model 907, 910 with code SB3 (Suspension seat comfort version, driver's seat) Model 907, 910 with code SB4 (Suspension seat comfort version, front passenger seat)
To do so, remove the bolt (10).

9

Remove suspension module.

If seat frame base (3) or suspension module is to be replaced.

Model 907, 910 with code SB3 (Suspension seat comfort version, driver's seat) Model 907, 910 with code SB4 (Suspension seat comfort version, front passenger seat)

AR91.10-D-0005TS

10

Install in the reverse order.



Check

11

Perform function check of front seat.