Remove/install suspension module

AR91.10-D-0005TS

Remove/install suspension module

18.07.2018

Model

907, 910

with code SB3 (Suspension seat, comfort version, driver's seat)

Model

907, 910

with code SB4 (Suspension seat, comfort version, co-driver's seat)

Shown with code SB3 (Comfort version suspension seat, driver's seat)

1

Electrical wiring harness

5

Screw

9

Bearing

2

Suspension module

6

Screw

10

Lever

3

Mounting clip

7

Screw

11

Bolts

4

Seat frame

8

Spacer sleeve

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove front seat.

AR91.10-D-1000TS

2

Remove front seat belt buckle.

AR91.40-D-1510TS

3

Remove electrical wiring harness (1) from suspension module (2).

If the retaining clip (3) is installed.

 For this, remove retaining clip (3) on lower side of suspension module (2).

 Installation: Check retaining clip (3) for damage.

If retaining clip (3) is damaged,



replace retaining clip (3).

4

Remove suspension module (2) from seat frame base (4).

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

 Observe position of spacer sleeve (8).

 To do this, remove screws (5, 6, 7).

 Installation: Check bearings (9) for damage.

 Screw, suspension module to seat frame base

*BA91.10-N-1008-01TS

If the bearings (9) are damaged.



Replace bearings (9).

5

Remove suspension module (2).

 To do so, operate lever (10) until the screws (11) are accessible. Then remove screws (11).

 Screw, seat frame base to suspension module

*BA91.10-N-1009-01TS

6

Install in the reverse order.



Check

7

Carry out function check of suspension module (2).

 Front seats

Number

Designation

Model 907, 910

BA91.10-N-1008-01TS

Screw, suspension module to seat frame base

Nm

26

 Front seats

Number

Designation

Model 907, 910

BA91.10-N-1009-01TS

Screw, seat frame base to suspension module

Nm

40