Remove/install outside mirror trim

AR88.70-D-9040TS

Remove/install outside mirror trim

14.11.2019

Model

907

except code FS1 (Mirror support, extended)

except code FS2 (Extra-long mirror bracket)

except code XL4 (Weight variant 5.500 kg)

except code ZU7 (National version for Canada)

except code ZU8 (National version for USA)

Model

910

except code FS1 (Mirror support, extended)

except code FS2 (Extra-long mirror bracket)

Shown on left outside mirror with code JB6 (Parking Package with 360° camera)

1

Outside mirror trim

2

Locks

3

Mirror frame

4

Catches

 

Remove/install

1

Remove upper and lower mirror glass at left and/or right outside mirror.

AR88.70-D-9020TS

2

Pull out locks (2) and remove.

3

Unclip mirror frame (3) from outside mirror trim (1) and remove.

 Clip remover

*452589016300

4.1

Remove turn signal lamp.

Model 907, 910 except code FU5 (Outside mirror without turn signal)

AR82.25-D-4727TS

4.2

Slide panel towards rear and remove.

Model 907, 910 with code FU5 (Outside mirror without turn signal)

5

Remove ambient lamp.

Model 907, 910 with code JB6 (Parking Package with 360° camera)

AR82.10-D-0001TS

6

Remove side camera with bracket.

Model 907, 910 with code JB6 (Parking Package with 360° camera)

AR54.65-D-0015TS

7

Release catches (4) and remove outside mirror trim (1).

 Installation: Check catches (4) for damage.

If damage is present,



Replace outside mirror trim (1).

8

Install in the reverse order.