Remove/install side camera

AR54.65-D-0015TS

Remove/install side camera

14.11.2019

Model

907, 910

with code JB6 (Parking package with 360-degree camera)

Shown on left outside mirror

1

Side camera

3

Bracket

4

Electrical connector

2

Outside mirror trim

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

2

Remove outside mirror trim (2) and remove until holder (3) with side camera (1) is accessible.

Model 907 except code FS1 (Mirror bracket, extended) or code FS2 (Mirror bracket, extra long), except code XL4 (Weight variant 5,500 kg), code ZU7 (National version for Canada) or code ZU8 (National version for U.S.A.), model 910 except code FS1 (Mirror bracket, extended) or code FS2 (Mirror bracket, extra long)

AR88.70-D-9040TS

3

Unclip holder (3) with side camera (1) upward from outside mirror trim (2).

4

Disconnect electrical connector (4) and remove side camera (1) together with holder (3).

5

Unclip side camera (1) at catch hooks (arrows) from holder (3) and remove.

If the side camera (1) in the left or right outside mirror is replaced.

6

Install in the reverse order.

7

Commission side camera (1) in left and right outside mirror using diagnostic system.

If the side camera (1) in the left or right outside mirror has been replaced.



AD00.00-D-2000-06TS

8.1

Calibrate side camera (1) in left or right outside mirror using diagnostic system.

If the side camera (1) in the left or right outside mirror has been removed.



AD00.00-D-2000-06TS

8.2

Calibrate all the cameras in the 360° camera system using the vehicle diagnosis system.

If the side cameras (1) in the left and right outside mirror have been removed.



AD00.00-D-2000-06TS