Remove/install mirror glass

AR88.70-D-9020TS

Remove/install mirror glass

31.01.2018

Model

907, 910

Shown on the left side of the vehicle, with code JA7 (Blind Spot Assist)

1

Mirror glass

2

Retaining clips

3

Mirror glass

4

Retaining clips

5

Electrical connectors

6

Electrical connectors

7

Electrical connector (with code JA7 (Blind Spot Assist))

8

Blind Spot Assist warning lamp (with code JA7 (Blind Spot Assist))

 

Remove/install

1

Remove respective mirror glass (1, 3) from each outside mirror


Carefully clip respective mirror glass (1, 3) out and in.
This prevents damage.

 To do this, carefully insert  long wedge at the side of the mirror glass (1) (arrow A) or against the mirror glass (3) from underneath (arrow B) and carefully clip out respective mirror glass (1, 3).

 Installation: Check retaining clips (2) of the mirror glass (1) or retaining clips (4) of the mirror glass (3) for damage.

 Long wedge

*115589035900

Depending on findings



Replace respective mirror glass (1, 3).

2

Remove Blind Spot Assist warning lamp (8) from the mirror glass (1)

Model 907, 910
with code JA7 (Blind Spot Monitoring)
When removing the mirror glass (1).

 To do this, unclip Blind Spot Assist warning lamp (8).

3

Disconnect corresponding electrical connectors (5, 6)

Model 907, 910
with code F68 (Exterior mirrors, electr. adjustable and heated)


To do this, carefully remove electrical connectors (5, 6).
Prevents damage.

4

Install in the reverse order



Clean

5

Clean respective mirror glass (1, 3)



Check

6

Carry out function check of the electrical functions of respective mirror glass (1, 3)

 The extent of electrical functions varies depending on the vehicle equipment.