P88.60-2176-09
1 Tank recess
2 Lock (not on model 451.39/49)
3 Fuel filler flap
4 Seal
9 Hinge bracket
M14/10 Fuel filler flap CL [ZV] motor
5 Snap-release tool
6 Adhesive tape
7 Bracket
8 Electrical connector
| Remove/install | ||
Danger! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
1 | Mask CBS rear in rear area of tank recess (1) with suitable adhesive tape (6) | ||
2 | Open fuel filler flap (3) | ||
3 | Unscrew lock (2) from tank filler neck | Not on model 451.39/49 | |
4 | Loosen lock (2) on hinge lever (9) (arrow A) and lay down to side | Not on model 451.39/49 | |
5 | Unclip bracket (7) from tank recess (1) with clip remover (5) | Clip remover | |
6 | Close fuel filler flap (3) and remove tank recess (1) until electrical connector (8) on fuel filler flap CL motor (M14/10) is accessible | ||
7 | Disconnect electrical connector (8) from fuel filler flap CL motor (M14/10) and remove tank recess (1) | ||
8 | Unclip fuel filler flap CL motor (M14/10) from tank recess (1) and remove | When replacing tank recess (1). | |
9 | Remove fuel filler flap (3) from hinge lever (9) in direction of arrow | When replacing tank recess (1). | |
10 | Remove hinge lever (9) from tank recess (1) and remove | When replacing tank recess (1). | |
11 | Install in the reverse order |
Clip remover
452 589 01 63 00
Powiązane dokumenty
- as4700z000101a Niebezpieczeństwo wybuchu wskutek zapalenia, niebezpieczeństwo zatrucia wskutek wdychania i połknięcia paliwa oraz niebezpieczeństwo obrażeń wskutek kontaktu skóry i oczu z paliwem.