Shown on model 447.8 |
1 | Engine hood |
2 | Hinge |
3 | Bolts |
4 | Cover |
5 | Check strap |
6 | Clip |
7 | Washer fluid hose |
8 | Cover |
9 | Windshield wiper arms |
10 | Bolts |
S88.40-4540-06
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Remove/install | ||
1 | Remove wiper arms (9) | ||
2 | Mark installation position of hinges (2) on engine hood (1) | ||
3 | Remove engine hood (1) | When removing both hinges (2). | |
4 | Remove paneling (8) from windshield | ||
5 | Mark installation position of hinge (2) in relation to body | ||
6 | Unhook check strap (5) from cover (4) on engine hood (1) | When removing individual hinge (2). | |
| |||
7 | Unscrew upper bolt (3) | When removing individual hinge (2). | |
Installation: Position upper bolt (3) finger-tight. | |||
8 | Detach lower bolt (3) two to three turns | When removing individual hinge (2). | |
9 | Secure engine hood (1) against falling down | When removing individual hinge (2). | |
10 | Remove screws (10) | Bolt, hinge to body | |
11 | Unscrew lower bolt (3) | When removing single hinge (2). | |
Installation: Position lower bolt (3) finger-tight. | |||
12 | Remove hinge (2) | Installation: Align hinge (2) at markings made previously. | |
13 | Install in the reverse order | ||
14 | Adjust engine hood |
Powiązane dokumenty
- ar8230s6951e
- ar8800s2792e
- ar8840s3000e
- ar8840s3020e
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.