S86.30-4548-09
1 | Wastewater container | 5 | Wastewater line | |
2 | Kitchenette | 6 | Electrical connector | |
3 | Screw | 7 | Fresh water line | |
4 | Electrical wiring harness | B146/1 | Wastewater fill level sensor |
Danger ! | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
| Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Drain wastewater container (1) | ||
2 | Detach kitchenette (2) and pivot into vehicle interior until wastewater container (1) is accessible | ||
3 | Remove screws/bolts (3) | ||
4 | Expose electrical wiring harness (4) on wastewater container (1) | ||
5 | Remove wastewater lines (5) and fresh water line (7) from wastewater container (1) | Collect fluid which runs out. | |
6 | Disconnect electrical connector (6) | ||
7 | Remove wastewater container (1) | ||
8 | Remove waste water fill level sensor (B146/1) | If wastewater container (1) is replaced. | |
9 | Install in the reverse order | ||
| Check | ||
10 | Fill wastewater container (1) with approx. 10 liters of water and check connections on wastewater lines (5) on wastewater container (1) for leakage | ||
11 | Drain wastewater container (1) |
Powiązane dokumenty
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ar8630s005901e
- ar8630s0088e
- ar8660s0003e
- as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.