Remove/install wastewater container

AR86.30-S-0059E

Remove/install wastewater container

17.10.2014

MODEL

447.8

with CODE ZK7 (Equipment line MARCO POLO)

1

Wastewater container

5

Wastewater line

2

Kitchenette

6

Electrical connector

3

Screw

7

Fresh water line

4

Electrical wiring harness

B146/1

Wastewater fill level sensor

 Danger !

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Drain wastewater container (1)

AR86.30-S-0059-01E

2

Detach kitchenette (2) and pivot into vehicle interior until wastewater container (1) is accessible

AR86.60-S-0003E

3

Remove screws/bolts (3)

4

Expose electrical wiring harness (4) on wastewater container (1)

5

Remove wastewater lines (5) and fresh water line (7) from wastewater container (1)

 Collect fluid which runs out.

6

Disconnect electrical connector (6)

7

Remove wastewater container (1)

8

Remove waste water fill level sensor (B146/1)

If wastewater container (1) is replaced.

AR86.30-S-0088E

9

Install in the reverse order



Check

10

Fill wastewater container (1) with approx. 10 liters of water and check connections on wastewater lines (5) on wastewater container (1) for leakage

11

Drain wastewater container (1)

AR86.30-S-0059-01E