ar8370s5630e

Remove/install auxiliary heater fuel line

Typ ar · temat 83.70 · wersja 0101 · 2014-11-22

Dotyczy: MODEL 447 with CODE H12 (Auxiliary hot-water heater)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.70 Ogrzewanie w czasie postoju, dodatkowe, nagrzewnica dodatkowa — Seria 447

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.25 Ogrzewanie postojowe/ ogrzewanie dodatkowe › 39.25.13 Przewód sztywny/elastyczny/zawór — Seria 447

AR83.70-S-5630E

Remove/install auxiliary heater fuel line

11.11.2014

MODEL

447

with CODE H12 (Auxiliary hot-water heater)

Remove/install auxiliary heater fuel line

S83.70-4681-09

1

Fuel line

4

Mounting plate

M46/1

STH fuel metering pump

2

Fuel tank

5

Bracket

3

Bracket

6

Riser line

Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Danger !

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Danger !

Risk of explosion caused by fuel vapors igniting, risk of poisoning caused by inhaling combustible gases and risk of injury caused by burns during and after operation of heater unit

Do not operate stationary heater, auxiliary heater or engine with heater booster in closed rooms or when refueling. Allow heater unit to cool down after operation and wear protective gloves.

AS83.70-Z-0002-01A

Remove/install

1

Remove heater unit

AR83.70-S-5330E

The electrical connections and coolant hoses are not removed. Bracket (3) must be accessible.

2

Lower fuel tank (2)


MODEL 447 with ENGINE 622, 651

AR47.10-S-4100E

Fuel line (1) must be accessible.

3

Detach fuel line (1) from stationary heater fuel metering pump (M46/1)

4

Remove bracket (3) from mounting plate (4)

Installation: Check bracket (3), replace if necessary.

5

Open the bracket (5)

Installation: Check bracket (5), replace if necessary.

6

Unclip fuel line (1) from fuel tank (2)

Installation: Ensure bulb is correctly installed.

7

Remove fuel line (1)

To do so, detach fuel line (1) from fuel tank (2) and remove upwards with riser line (6).

8

Install in the reverse order

Powiązane dokumenty