Remove/install condenser

AR83.30-D-6540TSF

Remove/install condenser

22.05.2018

Model

910 with engine 651

1

Condenser

 Danger

Risk of fire due to ignition of R1234yf refrigerant on hot components. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with escaped R1234yf refrigerant and when working on pressurized parts. Risk of explosion due to formation of ignitable refrigerant/air mixtures

Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated.

AS83.00-Z-0007-01A

 Warning

Risk of poisoning caused by inhaling overheated refrigerant vapors from an air conditioning system containing R134a. Risk of injury to skin and eyes caused by contact with liquid R134a refrigerant and when working on pressurized parts

Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated.

AS83.00-Z-0006-01A

Topical note

Protect air conditioning circuit and components from moisture when carrying out repair work

AH83.30-N-0005-01A

Notes on handling refrigerant R1234yf

AH83.30-P-0003-02A

Notes on handling refrigerant R134a

AH83.30-N-0003-01A

 

Remove/install

1

Remove radiator.

AR20.20-D-3865TSF

2

Remove condenser (1) from radiator.

 To do so, unlock condenser (1) (arrows) and remove.

3

Replace drier cartridge.

If condenser (1) is reused.

AR83.30-D-6521TS

4

Modify refrigerant pressure sensor.

If condenser (1) is replaced.

AR83.30-D-5445TSF

5

Install in the reverse order