ar8330d6540na

Install/remove condenser

Typ ar · temat 83.30 · wersja 0205 · 2004-05-26

Dotyczy: MODELS WD1, WD2, WD3, WD6, WD7 MODEL 903.67 with CODE (ZU7) National version for Canada MODEL 903.67 with CODE (ZU8) National version for USA MODEL 903.67 with CODE (ZU9) National version for Mexico MODELS XD1, XD2, XD3, XD4, XD6, XD5, XD7, YD1, YD2, YD3, YD4, YD6, YD5, YD7 with CODE (HH9) Automatic air conditioning "Tempmatic" MODELS 903.61 /66, 904.61 /66 with CODE (HH9) Automatic air conditioning "Tempmatic" with CODE (ZU7) National version for Canada MODELS 903.61 /66, 904.61 /66 with CODE (HH

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.30 Układ klimatyzacji — Seria 903 (modele 61*, 62*, 66*, 67*) · Seria 904 (modele 61*, 62*, 66*)

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.15 Klimatyzacja › 39.15.41 Skraplacz/osuszacz/chłodnica gazu — Seria 903 (modele 61*, 62*, 66*, 67*) · Seria 904 (modele 61*, 62*, 66*)

AR83.30-D-6540NA

Install/remove condenser

16.1.01

MODELS WD1, WD2, WD3, WD6, WD7

MODEL 903.67 with CODE (ZU7) National version for Canada

MODEL 903.67 with CODE (ZU8) National version for USA

MODEL 903.67 with CODE (ZU9) National version for Mexico

MODELS XD1, XD2, XD3, XD4, XD6, XD5, XD7, YD1, YD2, YD3, YD4, YD6, YD5, YD7 with CODE (HH9) Automatic air conditioning "Tempmatic"

MODELS 903.61 /66, 904.61 /66
with CODE (HH9) Automatic air conditioning "Tempmatic"
with CODE (ZU7) National version for Canada

MODELS 903.61 /66, 904.61 /66
with CODE (HH9) Automatic air conditioning "Tempmatic"
with CODE (ZU8) National version for USA

MODELS 903.61 /62 /66, 904.61 /62 /66
with CODE (HH9) Automatic air conditioning "Tempmatic"
with CODE (ZU9) National version for Mexico

Install/remove condenser

D83.30-1109-06

1 Capacitor

2 Refrigerant line for refrigerant compressor/condenser

3 Refrigerant line of condenser/fluid reservoir

4 Lower half of holder

5 Additional fan

6 Upper half of holder

7 additional fan connector

Remove/Install

Danger!

Risk of explosion caused by welding or soldering work on closed air conditioning system. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with liquid refrigerant.

Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been discharged.

AS83.00-Z-0001-01A

Protect air conditioning circuit and components from moisture when carrying out repair work

All models fitted with air conditioning

AH83.30-N-0005-01A

1

Discharge air conditioning system

2

Remove front bumper

AR88.20-D-2000NA

3

Remove headlamp

AR88.00-D-2115NA

4

Remove front end cross member together with front grille

AR88.00-D-2302NA

5

Disconnect refrigerant lines (2, 3) from condenser (1)

*BA83.30-N-1001-02A

*BA83.30-N-1003-02A

6

Disconnect additional fan connector (7)

7

Remove additional fan (5) together with bracket (6)

8

Remove bracket (4) at bottom

9

Disconnect condenser (1) from radiator

Installation: top up compressor oil. Replace lower clips with clip fasteners.

10

Install in the reverse order

11

Evacuate the air conditioning system, refill it, and then check the system to make sure that it functions correctly and does not leak.

Refrigerant lines

Number

Designation

Model
WD1/WD2/
WD3/WD6/
WD7/XD1/
XD2/XD3/
XD4/XD5/
XD6/XD7/
YD1/YD2/
YD3/YD4/
YD5/YD6/YD7
with code HH9

Models
901.6, 902.6, 903.6, 904.6,
905.6
with Code HH9

BA83.30-N-1001-02A

Refrigerant line of refrigerant compressor/condenser to refrigerant compressor

Nm

33

33

BA83.30-N-1003-02A

Refrigerant line on condenser/fluid reservoir on condenser

Nm

17

17

Powiązane dokumenty