ar8820d2000na

Remove/install front bumper

Typ ar · temat 88.20 · wersja 0104 · 2003-09-16

Dotyczy: MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 88 Części dobudowane, klapy zewnętrzne › 88.20 Zderzak — Seria 903 (modele 61*, 62*, 66*, 67*) · Seria 904 (modele 61*, 62*, 66*)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.38 Zderzak/spojler/okładzina zewnętrzna/schowek/przednie zabezpieczenie › 35.38.30 Zderzak przedni — Seria 903 (modele 61*, 62*, 66*, 67*) · Seria 904 (modele 61*, 62*, 66*)

AR88.20-D-2000NA

Remove/install front bumper

16.1.01

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Remove/install front bumper

D88.20-1101-06

1 Panel

2 Rivet

3 Bolt

4 Bumpers

5 Guide

6 Connector

7 Outside air temperature sensor

Remove/Install

1

Remove cover (1)

2

Remove left and right rivets (2)

3

Unscrew bolts (3)

Installation: Replace micro-encapsulated bolts.

*BA88.20-N-1001-01A

4

Pull bumper (4) out of side guides (5) toward front

Installation: Ensure that bumper is seated correctly in side guides

5

Unplug connector (6) from outside air temperature sensor (7)

6

Install in the reverse order

Number

Designation

Models
690.6, 901, 902, 903, 904, 905

Models
WD1/WD2/
WD3/WD6/
WD7/XD1/
XD2/XD3/
XD4/XD5/
XD6/XD7/
YD1/YD2/
YD3/YD4/
YD5/YD6/
YD7

BA88.20-N-1001-01A

Collar screw, front bumper to body

Nm

23

23