ar8310p2016r

Remove and install right center nozzle air flap actuator motor

Typ ar · temat 83.10 · wersja 0106 · 2008-02-05

Dotyczy: MODEL 230.4

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.10 Wentylacja — Seria 230 (modele 4**)

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.15 Klimatyzacja › 39.15.30 Silnik dmuchawy/ siłownik — Seria 230 (modele 4**)

AR83.10-P-2016R

Remove and install right center nozzle air flap actuator motor

23.1.08

MODEL 230.4

Remove and install right center nozzle air flap actuator motor

P83.10-2214-04

M16/24 Right center air outlet flap actuator motor

Remove/install

1.1

Remove radio

In vehicles without code (352) COMAND operating and display system

Model 230.467/474/475/476 up to 14.1.04.

AR82.60-P-7502R

1.2

Remove COMAND operating, display and controller unit

In vehicles with code (352) COMAND operating and display system.

Vehicles up to 14.1.04.

AR82.85-P-7472R

Vehicles as of 15.1.04.

AR82.85-P-7472RA

2

Remove stowage compartment or beverage holder

On vehicles up to 14.1.04.

AR68.10-P-1600R

3

Remove bolts from installation frame for radio or COMAND operating, display and controller unit

On vehicles as of 29.1.08 or with code (809) Model year 2009

4

Pull installation frame for radio or COMAND operating, display and controller unit out of dashboard

5

Remove right center air vent flap actuator motor (M16/24) from air conditioner housing

The right center air vent flap actuator motor (M16/24) is fastened with three bolts.

6

Disconnect electrical connector from right center air flap actuator motor (M16/24) and remove right center air flap actuator motor (M16/24)

7

Install in the reverse order

8

Read out fault memory, delete if necessary and normalize right center air flap actuator motor (M16/24)

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

Powiązane dokumenty