ar8310d0006ts

Remove/install housing for air distribution

Typ ar · temat 83.10 · wersja 0100 · 2018-09-12

Dotyczy: Model 907, 910

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.10 Wentylacja — Seria 907 · Seria 910

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.15 Klimatyzacja › 39.15.32 Obudowa/wymiennik ciepła/parownik/filtr — Seria 907 · Seria 910

AR83.10-D-0006TS

Remove/install housing for air distribution

06.09.2018

Model

907, 910

Remove/install housing for air distribution

D83.10-1206-78

Shown with CODE HH4 (THERMOTRONIC automatic air conditioning)

1

Air distribution housing

3

Electrical connector

2

Housing

4

Electrical wiring harness

Remove/install housing for air distribution

D83.10-1205-79

Shown with CODE HH4 (THERMOTRONIC automatic air conditioning)

1

Air distribution housing

7

Coolant pipes

2

Housing

8

Screw

5

Seal

9

Locking element

6

Bolts

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Topical note

Notes on coolant

AH20.00-N-2080-01A

Remove/install

1.1

Remove air conditioner housing.

Model 907, 910
with code HH4 (THERMOTRONIC automatic climate control)
Model 907, 910
with code HH9 (Air conditioner, automatic heater control)

AR83.30-D-5200TS

1.2

Remove heater box.

Model 907, 910
except code HH4 (THERMOTRONIC automatic climate control)
except code HH9 (Air conditioner, automatic heater control)

AR83.25-D-1000TS

2

Disconnect electrical connector (3) and unhook electrical wiring harness (4) from guides (arrows A).

Model 907, 910
with code HH4 (THERMOTRONIC automatic climate control)
Model 907, 910
with code HH9 (Air conditioner, automatic heater control)

3

Release seal (5) from coolant pipes (7).

WIS Service Media
wsm://04_201800_12
Operation steps 3 to 5 are shown.

4

Remove screw/bolt (8).

5

Remove locking element (9).

6

Remove bolts (6) and the air distribution housing (1) from housing (2).

7

Install in the reverse order.

Powiązane dokumenty