1 | Cover |
2 | Screw |
3 | Electrical connectors |
4 | Control unit |
5 | Bolts |
6 | Switches |
S77.20-4512-06
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Remove trim for sliding sunroof in pop-up roof. | ||
2 | Remove trim (1). | Unscrew bolt (2) to do this. | |
3 | Disconnect electrical connection (3). | ||
4 | Remove control unit (4) with the bracket. | To do this, remove the screw/bolts (5). | |
5 | Remove switch (6). | If the control unit (4) or switch (6) is replaced. | |
6 | Remove control unit (4) from bracket. | If a new control unit (4) is installed. | |
To do this, unscrew screw/bolts. | |||
7 | Install in the reverse order. | ||
| Check | ||
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
8 | Check function of the sliding sunroof. |
Powiązane dokumenty
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ar7720s0021e
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.