ar7720s0023e

Remove/install sliding sunroof control unit in pop-up roof

Type ar · topic 77.20 · version 0100 · 2018-08-01

Applies to: Model 447.7/8 with code D27 (Electric tilting/sliding glass sunroof) with code ZK9 (Lifting roof hatch) Model 447.8 with code D27 (Electric tilting/sliding glass sunroof) with code ZK0 (EASY UP pop-up roof, electric)

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.20 Electric sliding roof — Series 447 (models 7**, 8**)

EinPAS 38 Roof system › 38.15 Sliding roof/panoramic sliding sunroof › 38.15.11 Control unit/relay — Series 447 (models 7**, 8**)

AR77.20-S-0023E

Remove/install sliding sunroof control unit in pop-up roof

17.07.2018

Model

447.7/8

with code D27 (Electric tilting/sliding glass sunroof)

with code ZK9 (Lifting roof hatch)

Model

447.8

with code D27 (Electric tilting/sliding glass sunroof)

with code ZK0 (EASY UP pop-up roof, electric)

Remove/install sliding sunroof control unit in pop-up roof

1

Cover

2

Screw

3

Electrical connectors

4

Control unit

5

Bolts

6

Switches

S77.20-4512-06

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Remove trim for sliding sunroof in pop-up roof.

AR77.20-S-0021E

2

Remove trim (1).

Unscrew bolt (2) to do this.

3

Disconnect electrical connection (3).

4

Remove control unit (4) with the bracket.

To do this, remove the screw/bolts (5).

5

Remove switch (6).

If the control unit (4) or switch (6) is replaced.

6

Remove control unit (4) from bracket.

If a new control unit (4) is installed.

To do this, unscrew screw/bolts.

7

Install in the reverse order.

Check

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

8

Check function of the sliding sunroof.

Referenced documents