ar7720s0021e

Remove/install trim for sliding sunroof in pop-up roof

Typ ar · temat 77.20 · wersja 0300 · 2020-03-10

Dotyczy: Model 447.7/8 with code D27 (Electric tilting/sliding glass sunroof) with code ZK9 (Lifting roof hatch) Model 447.8 with code D27 (Electric tilting/sliding glass sunroof) with code ZK0 (EASY UP pop-up roof, electric)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 77 Okno dachowe, dach składany, nasadki › 77.20 Okno dachowe przesuwane elektrycznie — Seria 447 (modele 7**, 8**)

EinPAS 38 System dachu › 38.15 Okno dachowe przesuwne/ panoramiczne okno dachowe przesuwne › 38.15.32 Roleta/ kaseta/ okładzina — Seria 447 (modele 7**, 8**)

AR77.20-S-0021E

Remove/install trim for sliding sunroof in pop-up roof

21.02.2020

Model

447.7/8

with code D27 (Electric tilting/sliding glass sunroof)

with code ZK9 (Lifting roof hatch)

Model

447.8

with code D27 (Electric tilting/sliding glass sunroof)

with code ZK0 (EASY UP pop-up roof, electric)

Modification notes

18.02.2020

Method changed, work procedure adapted

Operation step 17

Remove/install trim for sliding sunroof in pop-up roof

S77.20-4513-09

1

Sliding roof

3

Bolts

5

Switches

2

Cover

4

Bolts

6

Cover

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove

1

Completely open sliding roof (1).

2

Remove pneumatic springs.


Model 447.7/8
with code D27 (Electric tilting/sliding glass sunroof)
with code ZK9 (Lifting roof hatch)

AR77.70-S-0004E

3

Remove roof support of the pop-up roof.


Model 447.7/8
with code D27 (Electric tilting/sliding glass sunroof)
with code ZK9 (Lifting roof hatch)

AR77.00-S-1000E

A helper is required.

4.1

Open pop-up roof and bring to suitable working height.

Model 447.8
with code D27 (Electric tilting/sliding glass sunroof)
with code ZK0 (EASY UP pop-up roof, electric)

AR77.75-S-0001-03E

There must be sufficient space available to remove the trim (6).

4.2

Lift pop-up roof and bring to suitable working height.

Model 447.7/8
with code D27 (Electric tilting/sliding glass sunroof)
with code ZK9 (Lifting roof hatch)

There must be sufficient space available to remove the trim (6).

Lift pop-up roof and support with a suitable tool.

5

Switch off ignition.

Model 447.8
with code D27 (Electric tilting/sliding glass sunroof)
with code ZK0 (EASY UP pop-up roof, electric)

6

Disconnect ground line of auxiliary battery.

AR54.10-S-0004E

7

Remove trim (2).

To do this, remove screws/bolts (3).

8

Remove screws/bolts (4).

9

Remove switch (5) from trim (6) and place outside of working area.

10

Remove trim (6).

To do this, unclip trim (6) from locking elements (arrows).

Install

11

Install trim (6).

12

Position switch (5) in trim (6).

13

Screw in screws/bolts (4) .

14

Install trim (2).

Screw in bolts (3) to do this.

15

Attach ground line of the auxiliary battery.

AR54.10-S-0004E

16.1

Close pop-up roof.

Model 447.8
with code D27 (Electric tilting/sliding glass sunroof)
with code ZK0 (EASY UP pop-up roof, electric)

AR77.75-S-0001-03E

16.2

Install pneumatic springs.

Model 447.7/8
with code D27 (Electric tilting/sliding glass sunroof)
with code ZK9 (Lifting roof hatch)

AR77.70-S-0004E

Remove tool used for support.

17

Perform normalization of the sliding roof (1).

To do this, completely close sliding roof (1) and then open and close again.

Powiązane dokumenty