S72.20-4700-09
1 | Rear-end door bearing bracket | 5 | Bolts | |
2 | Door foil | 6 | Cable | |
3 | Rear-end door lock | 7 | Door handle seal | |
4 | Plug | 8 | Screw |
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Detach door foil (2) of rear-end door in upper area until door lock of rear-end door (3) can be accessed | ||
Installation: Replace damaged door foil (2). | |||
2 | Remove outside door handle from rear-end door | ||
3 | Remove stop plug (4) | ||
4 | Remove bolts (5) | ||
5 | Remove cable (6) from rear-end door bearing bracket (1) | ||
6 | Remove door handle seal (7) from rear-end door | ||
7 | Unscrew bolt (8) | ||
8 | Push door lock of rear-end door (3) to one side and remove rear-end door bearing bracket (1) downward out of rear-end door | ||
9 | Install in the reverse order | ||
| Check | ||
10 | Perform function check of door lock of rear-end door (3) and outside door handle |
Powiązane dokumenty
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ar7220s2420e
- ar7220s4100e
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.