S72.16-4660-09
1 | Bearing bracket | 4 | Cable | |
2 | Sliding door | 5 | Door handle seal | |
3 | Door foil | 6 | Screw |
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Remove door trim from sliding door (2) | ||
2 | Detach door foil (3) from sliding door (2) until bearing bracket (1) can be accessed | Installation: Replace damaged door foil (3). | |
3 | Remove outside door handle from sliding door (2) | ||
4 | Remove door handle seal (5) from sliding door (2) | ||
5 | Remove cable (4) from bearing bracket (1) | ||
6 | Remove bolt (6) | ||
7 | Remove bearing bracket (1) from sliding door (2) | ||
8 | Install in the reverse order | ||
| Check | ||
9 | Perform function check of sliding door lock and outside door handle |
Powiązane dokumenty
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ar7216s2220e
- ar7216s6610e
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.