Remove/install door panel of sliding door

AR72.16-S-6610E

Remove/install door panel of sliding door

18.02.2016

Model

447, 448

Shown on removed sliding door with code E65 (Burmester surround sound system) and with code LC1 (Ambiance illumination)

1

Paneling for top sliding door frame

2

Cover

3

Door trim

4

Retaining clips

5

Retaining clips

 Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove lower and upper sliding door paneling

Model 447.6
Model 447.7
except code V23 (Interior panelling higher execution)

AR68.30-S-1180E

2

Remove top sliding door frame paneling (1)

Model 447.7, 448.7
with code V23 (Interior panelling higher execution)
Model 447.8, 448.8

AR72.16-S-6613E

3

Remove cover (2) and unscrew bolt below

Model 447.7, 448.7
with code V23 (Interior panelling higher execution)
Model 447.8, 448.8

 Bolt, door guide at bottom to sliding door

*BA72.16-N-1003-01J

4.1

Unclip door trim (3) and remove

Model 447.7, 448.7
with code V23 (Interior panelling higher execution)
Model 447.8, 448.8
except code E65 (Burmester surround sound system)
except code LC1 (ambient lighting)

 Installation:
Always replace all retaining clips (5).
Otherwise the door paneling (3) cannot be seated permanently on the sliding door.

 Long wedge

*115589035900

4.2

Unclip door trim (3) and remove until electrical connectors on door paneling (3) are accessible

Model 447.8, 448.8
with code E65 (Burmester surround sound system)
Model 447.8, 448.8
with code LC1 (ambient lighting)

 Installation:
Always replace all retaining clips (5).
Otherwise the door paneling (3) cannot be seated permanently on the sliding door.

 The number of electrical connectors varies depending on equipment installed.

 Long wedge

*115589035900

5

Disconnect electrical connectors from door trim (3) and remove door paneling (3)

Model 447.8, 448.8
with code E65 (Burmester surround sound system)
Model 447.8, 448.8
with code LC1 (ambient lighting)

6

Install in the reverse order



Check

7

Check all electrical components in repair area for proper function

 Sliding doors

Number

Designation

Model 447, 448

BA72.16-N-1003-01J

Bolt, door guide at bottom to sliding door

Nm

23