Remove/install upper guide rail for sliding door

AR72.16-D-7811TS

Remove/install upper guide rail for sliding door

18.06.2018

Model

907.6/7, 910.6

Shown on model 907.6 with code D03 (roof and rear-end doors, high version)

1

Guide rail at top

3

Lamp

6

Nuts

2

Cable duct

4

Bracket

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove top carriage of the right and left sliding door.

AR72.16-D-7842TS

2

Remove center roof lining.

Model 907.6
with code V36 (Panelling under roof)
Model 907.7

AR68.30-D-7609TSR

3.1

Remove cable ducts (2).

Model 907.6
with code T19 (Sliding door left)
except code V36 (Panelling under roof)
Model 910.6
with code T19 (Sliding door left)
If the top left guide rail (1) is removed.

3.2

Remove bracket (4) together with the lamp (3).

Model 907.6
with code T16 (Sliding door right)
except code V36 (Panelling under roof)
Model 910.6
with code T16 (Sliding door right)
If the top right guide rail (1) is removed.

4

Unscrew nuts (6).

 Nut, guide rail at top to body

*BA72.16-N-1015-01TS

5

Using a suitable rubber hammer, release the top guide rail (1) by applying gentle blows to the threaded pins (arrows).

6

Remove top guide rail (1).

7

Install in the reverse order.

 Sliding door

Number

Designation

Model 907.6/7, 910.6

BA72.16-N-1015-01TS

Nut, guide rail at top to body

Nm

7