P72.10-2568-06
1 Bolt
2 Electrical connector
3 Electrical connector
4 Electrical connector
5 Electrical connector
6 Tie strap
7 Crank window seal
P72.10-2569-06
8 Door paneling
9 Bolt
10 Bolts
11 Bolts
12 Clip
P72.10-2570-09
8 Door paneling
13 Control cable
14 Front door inner actuation
17 Cable
18 Clip
15 Bracket
16 Cable duct
| Remove/Install | ||
1 | Remove door paneling | ||
2 | Remove door liner on front door | ||
3 | Remove triangular window | ||
4 | Remove switches for front power windows | On vehicles except code (L16) Japan. | |
On vehicles with code (L16) Japan, only driver's side | |||
5 | Unscrew bolt (1) | ||
6 | Disconnect electric connector (2) | Do not damage catch lugs, otherwise plug no longer locks. Installation: Observe arrest of electrical connector (2). | |
7 | Disconnect electrical connectors (3), (4), (5) | Do not damage catch lugs, otherwise plug no longer locks. Installation: Ensure that electrical connectors (3), (4), (5) arrests properly. | |
8 | Remove tie strap (6) | ||
9 | Pull crank window seal (7) out of rail | ||
10 | Unscrew bolt (9) | ||
11 | Unscrew bolts (10). | | |
12 | Remove bolts (11). | ||
13 | Unclip clip (12) from center strut at front of door shell | ||
14 | Unhook door liner (8) at top of door shell (arrow). | Unhook door wiring harness and control cable (13) from mounting clip. | |
15 | Pull door liner (8) toward passenger compartment as far as required. | ||
16 | Unhook control cable (13) from front door inner actuation (14). | ||
17 | Press mount (15) to side and remove front door inner actuation (14) from door liner (8). | ||
18 | Unclip cable duct (16) from door liner (8). | Open door completely. Installation: Arrest cable duct (16) | |
19 | Pull cable (17) out of guide. | ||
20 | Remove clip (18) | Pull door wiring harness out through cable duct opening. | |
21 | Remove door liner (8) | ||
22 | Install in the reverse order |
Front door