Prepare upper left B-pillar paneling (1), vehicles except code T19 (Left sliding door)
S68.30-4707-09
1 | Left upper B-pillar paneling | 1.3 | Pin | C | 60 mm | ||
1.1 | Ø 8.8 mm hole for curtain rod | A | 10 mm | D | 80 mm | ||
1.2 | Ø 4.2 mm hole for pin | B | 18 mm |
1 | Drill Ø 8.8 mm hole for curtain rod (1.1) in left upper B-pillar paneling (1) as shown. |
Dimensions (A, B) measured at 90° angle from outer edges of left upper B-pillar paneling (1). |
2 | Drill Ø 4.2 mm holes for pin (1.2) in left upper B-pillar paneling (1) as shown. |
Dimensions (C, D) measured at 90° angle from outer edges of left upper B-pillar paneling (1). |
3 | Fasten pin (1.3) to left upper B-pillar paneling (1) with blind rivets. |
Prepare left C-pillar paneling (2), vehicles except code T19 (Left sliding door)
S68.30-4708-09
2 | Left C-pillar paneling | F | 8 mm | K | 55 mm | ||
2.1 | Ø 8.8 mm hole for curtain rod | G | 45 mm | L | 43 mm | ||
2.2 | Ø 4.2 mm hole for pin | H | 75 mm | M | 10 mm | ||
2.3 | Pin | I | 37 mm | ||||
E | 18 mm | J | 50 mm |
4 | Drill Ø 8.8 mm holes for curtain rod (2.1) in left C-pillar paneling (2) as shown. |
Dimensions (E, F, M) measured at 90°angle from outer edge of left C-pillar paneling (2). |
5 | Drill Ø 4.2 mm holes for pins (2.2) in left C-pillar paneling (2) as shown. |
Dimensions (G, H, I, J, K, L) measured at 90°angle from outer edge of left C-pillar paneling (2). |
6 | Fasten pins (2.3) to left C-pillar paneling (2) with blind rivets. |
Prepare left and right C-pillar paneling (3), vehicles with code T19 (Left sliding door), shown on right C-pillar paneling (3)
S68.30-4709-07
3 | C-pillar paneling | 3.3 | Pin | P | 10 mm | ||
3.1 | Ø 8.8 mm hole for curtain rod | N | 40 mm | Q | 25 mm | ||
3.2 | Ø 4.2 mm hole for pin | O | 58 mm |
7 | Drill Ø 8.8 mm holes for curtain rod (3.1) in C-pillar paneling (3) as shown. |
Dimensions (Q, P) measured at 90°angle from outer edge of C-pillar paneling (3). |
8 | Drill Ø 4.2 mm holes for pins (3.2) in C-pillar paneling (3) as shown. |
Dimensions (N. O) measured at 90°angle from outer edge of C-pillar paneling (3). |
9 | Fasten pins (3.3) to C-pillar paneling (3) wit blind rivets. |
Prepare left and right front window frame paneling (4), vehicles with code T19 (Left sliding door), shown on right front window frame paneling (4)
S68.30-4710-09
4 | Front window frame paneling | R | 160 mm | V | 358 mm | ||
4.1 | Ø 8.8 mm hole for curtain rod | S | 102 mm | W | 300 mm | ||
4.2 | Ø 4.2 mm hole for pin | T | 20 mm | X | 31 mm | ||
4.3 | Pin | U | 17 mm | Y | 38 mm |
10 | Drill Ø 8.8 mm hole for curtain rail (4.1) in front window frame paneling (4) as shown. |
Dimensions (R, U, V) measured at 90° angle from outer edges of front window frame paneling (4). A flexible measuring tape is laid directly on the front window frame paneling (4). |
11 | Drill Ø 4.2 mm holes for pins (4.2) in front window frame paneling (4) as shown. |
Dimensions (S, T, W, X, Y) measured at 90° angle from outer edges of front window frame paneling (4). A flexible measuring tape is laid directly on the front window frame paneling (4). |
12 | Fasten pins (4.3) to front window frame paneling (4) with blind rivets. |
Prepare inner D-pillar paneling (5), shown on right inner D-pillar paneling (5)
13 | Drill Ø 4.2 mm holes for pins (5.2) in inner D-pillar paneling (5) as shown. |
Dimensions (a, b, c, d) measured at 90° angle from outer edges of inner D-pillar paneling (5). |
14 | Fasten pins (5.3) to inner D-pillar paneling (5) with blind rivets. |
5 | Inner D-pillar paneling |
5.2 | Ø 4.2 mm hole for pin |
5.3 | Pin |
a | 82 mm |
b | 35 mm |
c | 50 mm |
d | 42 mm |
S68.30-4711-06