ar6830d7608tsr

Remove/install rear roof paneling

Typ ar · temat 68.30 · wersja 0100 · 2018-08-01

Dotyczy: Model 907.6/7

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 68 Wyposażenie wewnętrzne › 68.30 Wykładziny, rama ozdobna — Seria 907 (modele 6**, 7**)

EinPAS 37 Wyposażenie wnętrza › 37.45 Okładzina › 37.45.32 Okładzina dachu — Seria 907 (modele 6**, 7**)

AR68.30-D-7608TSR

Remove/install rear roof paneling

17.07.2018

Model

907.6/7

Remove/install rear roof paneling

D68.30-2519-78

Shown on model 907.7 with code H08 (roof-mounted air conditioning system, enhanced)

1

Retaining clips

3

Expansion rivet

2

Rear center headliner

4

Rear headliner

Remove/install rear roof paneling

D68.30-2520-78

Shown on model 907.7 with code H08 (roof-mounted air conditioning system, enhanced)

2

Rear center headliner

5

Expansion rivet

4

Rear headliner

6

Electrical wiring harness

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove interior protection sensor in passenger compartment.

Model 907.6/7
with code FY1 (Anti-Theft Protection package)

AR80.50-D-9835TSR

2

Remove corresponding dome lamps in the passenger compartment.

AR82.20-D-0117TSR

3

Remove rear section of the air duct of the roof-mounted air conditioning system.

Model 907.6/7
with code H08 (Roof-mounted air conditioning system, reinforced)
Model 907.6/7
with code HH7 (Roof-mounted air conditioning system, basic)
Model 907.6/7
with code HK4 (Rear air conditioning, reinforced)

AR83.50-D-7980-02TSR

4

Remove D-pillar trims.

AR68.30-D-4497TSR

5

Unclip retaining clips (1) of the rear center roof lining section (2).

Installation: Replace damaged retaining clips (1).

Clip remover

*452589016300

6

Remove expansion rivet (3) of the rear roof lining (4).

Installation: Replace damaged expansion rivet (3).

Clip remover

*452589016300

7

Remove expansion rivets (5) of the rear roof lining (4).

Installation: Replace damaged expansion rivets (5).

Clip remover

*452589016300

8

Guide electrical wiring harness (6) out of the rear roof lining (4).

9

Carefully lower rear roof lining (4) and take out of the vehicle.

10

Install in the reverse order.

Check

11

Perform function test of the dome lamps.

12

Perform function test of the interior protection sensor.

Model 907.6/7
with code FY1 (Anti-Theft Protection package)

Remove/install rear roof paneling

452 589 01 63 00

Clip remover

Powiązane dokumenty