S68.10-2004-09
Shown on model 638 except models 638.094/194/294
1 Screw
2 Cover of speaker
3 Foam rubber wedge
4 Loudspeaker
5 Bolt
11 Cable of parking brake
12 Bolt
13 Bolt
14 Bolt
S119 Switch off fog lamps
6 Bolt (only in models 638.094/194/294)
7 Fuse box
8 Release lever of parking brake
9 Bolt
10 Cover of hood release
| Removing, installing | ||
| Notes on battery | All models | |
1 | Disconnect ground cable of battery | Installation: - Encode radio. | |
2 | Remove steering column switch | ||
3 | Remove instrument cluster | Only in model 638 except 638.094/194/294 | |
Remove instrument cluster | Only in model 638.094/194/294 | ||
4 | Remove switch of fog lights (S119) | In model 638.0/1/2 except 638.294. | |
In model 638.294. | |||
5.1 | Detach passenger airbag | Only with code SA6. | |
6 | Remove ashtray | ||
N | Remove cover of instrument panel in middle | ||
8 | Remove right and left speakers (4) | ||
9 | Open glove compartment lid, unclip lighting and separate plug connection | ||
10 | Take off covers on left and right below instrument panel | ||
11 | Detach cable of parking brake (11) and take off release lever of parking brake (7) | ||
12 | Unscrew bolts (9), take off cover of hood release (10) | Cable for hood release can remain installed. | |
13 | Unscrew bolts (5) | Remove foam rubber wedge (3) first of all. | |
Installation: Ensure the foam rubber wedge (3) is correctly installed. | |||
14 | Remove screws (14) below instrument cluster | ||
15.1 | Take out screw (6) of heater operating unit | Only in model 638.094/194/294. | |
16 | Unclip electrical system of airbag from bottom part of instrument panel | ||
17 | Remove fuse box (7) | The fuse box system remains installed. | |
18 | Take out screw (13) below the ashtray | ||
19 | Take out screw (12) behind cover of instrument panel in middle | ||
20 | Unscrew screws (1) | Screws (1) must be pressed out on both sides. | |
21 | Pull out instrument panel | Pull out instrument panel carefully. Ensure that no electric cables are damaged. | |
Installation: The guide pins must engage in the recesses (arrows). | |||
22 | Install in the reverse order | ||
| Inspecting | ||
23 | Read fault memory, erase | See step 3 for this purpose. |
Powiązane dokumenty
- ah5410p000101a Wskazówki dotyczące akumulatora
- ah5410p000101a
- ar5410s0005a
- ar5425s2801a
- ar5425s3251a
- ar5425s3251b
- ar5430s6015a
- ar5430s6015b
- ar6810s3430a
- ar8200s9999a
- ar8262s7833a
- ar9160s0680a