P64.20-3459-06
Illustrated on model 171
1 Spare tire well
| Removing | ||
Danger! | Risk of death caused by high voltage used for electric welding. Risk of explosion caused by welding in the area of highly inflammable materials. Risk of injury caused by welding splatter and UV light while welding. Risk of poisoning caused by inhaling welding fumes. | Use insulating mats. Wear protective clothing, safety glasses and protective mask. Remove highly inflammable materials from the hazard area. Use air extractor system. | |
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
Danger! | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. | |
Danger! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
Danger! | Risk of explosion caused by paint vapors igniting. Risk of poisoning caused by inhaling paint vapors. | No smoking! No open fire! Use respiratory protection, protective clothing, gloves, safety glasses and skin cream. Ensure that the area is well ventilated. | |
| Measures for preventing damage to components when performing electric welding and soldering work | ||
| General information on body repair | ||
| Notes on paintwork repairs | ||
| General information on riveting | ||
| General information on MB materials | ||
1 | Remove detachable parts in area to be repaired | ||
2 | Cover all detachable parts remaining in vehicle with fire-resistant welding protection blanket | Welding protective blanket gotis://K_60-65_23.0 | |
3 | Raise vehicle | Two-column lift 3.0 - -3.5 t electromechanical gotis://H_00.1_01.0 | |
Two-post lifting platform, 2.5 - 3.5 t electrohydraulic gotis://H_00.1_01.1 | |||
4 | Remove spare tire well (1) | Round wire brush gotis://K_58.3_06.0 | |
Weld-spot milling machine gotis://K_58.1_02.0 | |||
Wet and dry vacuum cleaner gotis://P_00.12_06.0 | |||
Zinc dust paint suitable for spot welding | |||
| Install | ||
5 | Install spare tire well (1) | Pneumatic-mechanical blind rivet tool gotis://K_58.3_10.2 | |
Vice grip pliers (standard) gotis://K_58.3_04.2 | |||
Round wire brush gotis://K_58.3_06.0 | |||
Manual temporary fastener, 6.35 mm gotis://K_58.3_10.0 | |||
Zinc dust paint suitable for spot welding | |||
Blind rivet 6.512.5 | |||
6 | Remove welding protection blankets | ||
7 | Clean repair area | Wet and dry vacuum cleaner gotis://P_00.12_06.0 | |
8 | Prime area to be repaired using primer filler | Use only primer filler approved by Daimler AG. | |
http://portal.aftersales.i.daimler.com | |||
9 | Carry out seam sealing after repairs | Supplement standard seals with sealant. | |
Model 171 | |||
Model 172 | |||
10 | Paint repair areas and adjacent surfaces | Use only paints approved by Daimler AG. | |
http://portal.aftersales.i.daimler.com | |||
11 | Apply additional cavity preservation | Model 171 | |
Model 172 | |||
12 | Install all detachable body components in area to be repaired |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
BR00.45-Z-1012-13A | Blind rivet 6.512.5 | A 004 990 16 97 |
Powiązane dokumenty
- ah6000n000101a Ogólne wskazówki dotyczące napraw nadwozia
- ah6000p000102a Środki zapobiegające uszkodzeniom pojazdu lub jego elementów podczas spawania elektrycznego i lutowania
- ah6000p000301n Ogólne wskazówki dotyczące nitowania
- ah9800p940802a Wskazówki dotyczące napraw powłok lakierniczych
- ah9800p940903a Informacje ogólne dotyczące środków MB
- ar6420p124501v
- ar6420p124503v
- ar9710p4000v
- ar9710p4000w
- ar9720p1500v
- ar9720p1500w
- as0000z000701a Zagrożenie dla życia przez wysokie napięcie przy spawaniu elektrycznym. Niebezpieczeństwo wybuchu podczas spawania w pobliżu materiałów łatwopalnych. Niebezpieczeństwo urazu na skutek odprysków przy spawaniu oraz promieniowania u
- as0000z001001a Zagrożenie życia na skutek ześlizgnięcia lub spadnięcia pojazdu z podnośnika.
- as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.
- as4700z000101a Niebezpieczeństwo wybuchu wskutek zapalenia, niebezpieczeństwo zatrucia wskutek wdychania i połknięcia paliwa oraz niebezpieczeństwo obrażeń wskutek kontaktu skóry i oczu z paliwem.
- as9800z000201a Niebezpieczeństwo eksplozji w wyniku zapalenia się oparów lakierniczych. Niebezpieczeństwo zatrucia na skutek wdychania oparów lakierniczych.